[Allstar Digital] DMRlink first questions

[David KE6UPI]

I found a sample called playback_config_SAMPLE.py in /opt/dmrlink/samples.
Does that need to be edited and placed in /opt/dmrlink/gateway?

David


On Fri, Dec 11, 2015 at 11:45 AM, Robert Newberry <N1XBM at amsat.org> wrote:

> I have my repeater on a dummy load and the RPI2 and my laptop all on a
> unmanaged switch for testing.
>
> On dmrlink.cfg
>
> My thought was to make the RPI2 running dmrlink the master and my repeater
> as the peer. Is this possible? I am unsure how I would do that. My guess is
> I would put the IP of the RPI2 in the dmrlink.cfg
>
> Steve, had mentioned get my repeater parroting on a tg.
>
> So I looked at playback.py I see tg ID for a group call is 12345 on ts2
> and private is the same except ts 1 and 2. So if I set my radio up
> accordingly. I should parrot on those IDs.
>
> What other files do I need to edit?
>
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086, 42658
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151211/c5c73eb4/attachment.html>