[Allstar Digital] DMRGateway test Master online

[David KE6UPI]

No Luck,

I'm not using a DMR repeater. (I don't have one.)

My setup.

RPi Dial Node 2084 --> USRP --> DMRLink peered to N4IRS.

Should this work? I'm starting /opt/dmrlink/gateway/dmrlink.py . Should I
be starting it under the bridge dir?

Thanks, David




On Tue, Dec 15, 2015 at 6:26 AM, Steve Zingman <szingman at msgstor.com> wrote:

> Point a peer at the test master, either a repeater or DMRlink. If it's
> DMRlink, send the log to the console and set the log level to DEBUG. listen
> to the repeater or watch the screen. You will see the traffic.
>
>
> On 12/15/2015 9:08 AM, Robert Newberry wrote:
>
> OK I'll just drop it for now. I feel like I said that and reading your
> reply I still feel the same way. Anyways I'll just save on bandwidth and
> worry about when I need to cross that bridge.
>
> Thanks
>
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086, 42658
>
>
>
> _______________________________________________
> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151215/e2ee85a7/attachment.html>