[Allstar Digital] Playback

[Steve Zingman]

The dmrlink.cfg in playback is only for playback. Disable or remove 
N1XBM_MASTER
Make sure it connects to the master as a peer


On 12/26/2015 04:33 PM, Robert Newberry wrote:
> So long e-mail here with questions.
>
> I should be working in /opt/dmrlink/playback
> The files I need to be concerned with are dmrlink.cfg and 
> playback_config.py
> Now to get echo going do I just run playback.py?
>
> So I setup up playback_config.py with TG 9998 time slot 0...well one, 
> but I think you know what I mean.
> I programed my radio the same way. I also programmed the repeater, 
> That end of it seems to be OK.
>
> Now dmrlink.cfg is where I am confused. So I've pointed my repeater to 
> 192.168.0.203 port 50002 which is the IP of my RPI2. I've confirmed my 
> auth key is correct. Got any suggestions where I am hosed?
>
> [PLAYBACK_PEER]
> ENABLED: True
> RADIO_ID: 12345
> IP: 0.0.0.0
> PORT: 50002
> ALIVE_TIMER: 5
> MAX_MISSED: 20
> PEER_OPER: True
> IPSC_MODE: DIGITAL
> TS1_LINK: True
> TS2_LINK: True
> CSBK_CALL: False
> RCM: True
> CON_APP: True
> XNL_CALL: False
> XNL_MASTER: False
> DATA_CALL: True
> VOICE_CALL: True
> MASTER_PEER: False
> AUTH_ENABLED: True
> AUTH_KEY: A1B2C3
> MASTER_IP: 192.168.0.203
> MASTER_PORT: 50001
>
> [N1XBM_MASTER]
> ENABLED: True
> RADIO_ID: 54321
> IP: 0.0.0.0
> PORT: 50001
> ALIVE_TIMER: 5
> MAX_MISSED: 20
> PEER_OPER: True
> IPSC_MODE: DIGITAL
> TS1_LINK: True
> TS2_LINK: True
> CSBK_CALL: False
> RCM: True
> CON_APP: True
> XNL_CALL: False
> XNL_MASTER: False
> DATA_CALL: True
> VOICE_CALL: True
> MASTER_PEER: True
> AUTH_ENABLED: True
> AUTH_KEY: A1B2C3
> # Below not used for a Master
> # MASTER_IP: 1.2.3.4
> # MASTER_PORT: 50000
>
>
> On Fri, Dec 25, 2015 at 1:14 PM, Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     It sends to the same TS and TG defined in payback config
>
>
>     On 12/25/2015 01:13 PM, Robert Newberry wrote:
>>
>>     Sorry I hit send a little to early.
>>
>>     I would assume there has to be a place somewhere that would
>>     indicate where to send that back to.
>>
>>     N1XBM
>>     Apparare Scientor
>>     Paratus Communicare
>>     Allstar Node # 27086, 41540, 41812, 42086, 42658
>>
>>     On Dec 25, 2015 1:11 PM, "Robert Newberry" <N1XBM at amsat.org
>>     <mailto:N1XBM at amsat.org>> wrote:
>>
>>         So in dmrlink.cfg I have my RPI2 as a master. I've pointed my
>>         repeater at my RPI2. That all seems fine, where I'm confused
>>         is how does the software know how or where to echo the audio
>>         back to?
>>
>>         N1XBM
>>         Apparare Scientor
>>         Paratus Communicare
>>         Allstar Node # 27086, 41540, 41812, 42086, 42658
>>
>>         On Dec 24, 2015 6:28 PM, "Steve Zingman"
>>         <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>
>>             It's in dmrlink.cfg
>>
>>
>>
>>             Sent via smoke signal (AT&T 4G LTE)
>>
>>
>>             -------- Original message --------
>>             From: Robert Newberry <N1XBM at amsat.org
>>             <mailto:N1XBM at amsat.org>>
>>             Date: 12/24/2015 3:14 PM (GMT-05:00)
>>             To: Digital linking using Asterisk and app_rpt
>>             <allstar-digital at lists.keekles.org
>>             <mailto:allstar-digital at lists.keekles.org>>
>>             Subject: [Allstar Digital] Playback
>>
>>             I edited /opt/dmrlink/playback/dmrlink.cfg
>>             I did the same for playback_config.py in the same directory
>>
>>             I ran dmrlink.py and didn't get any errors. I the hit
>>             ctrl c and then ran playback.py I didn't see any errors.
>>             Although I'm not getting any echo.
>>
>>             Is there any things I should be looking at to troubleshoot?
>>
>>             Also I want to see the log live on the console, but I
>>             can't remember how.
>>
>>             N1XBM
>>             Apparare Scientor
>>             Paratus Communicare
>>             Allstar Node # 27086, 41540, 41812, 42086, 42658
>>
>>
>>             _______________________________________________
>>             Allstar-Digital mailing list
>>             Allstar-Digital at lists.keekles.org
>>             <mailto:Allstar-Digital at lists.keekles.org>
>>             http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>>
>>     _______________________________________________
>>     Allstar-Digital mailing list
>>     Allstar-Digital at lists.keekles.org
>>     <mailto:Allstar-Digital at lists.keekles.org>
>>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>     -- 
>     "Anything is possible if you don't know what you are talking about."
>     1st Law of Logic
>
>
>     _______________________________________________
>     Allstar-Digital mailing list
>     Allstar-Digital at lists.keekles.org
>     <mailto:Allstar-Digital at lists.keekles.org>
>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151226/b2469769/attachment.html>