[Allstar Digital] DMRlink and DMRGateway

[Steve N4IRS]

You are correct. Without modifications you can use the bridge rules to 
route TG traffic to any peer or master.
We have made modifications to the ambe_audio.py program to send AMBE 
frames to DMRGateway.

We are adding changes to bridge.py to add support for "User Activated" 
(PTT) Talk groups and a priority system.

Yes, All the hardware you need is a PRi2 and a DV3000.

73, Steve

On 11/30/2015 10:15 AM, Robert Newberry wrote:
>
> So I was reading thru the documentation for DMRlink. One thing I found 
> interesting was not only with proper software I can feed this into the 
> USRP channel driver. It also appears this can function as a very basic 
> c bridge.
>
> Am I understanding this right? I could could have a handful of DMR 
> repeaters on my own IPSC network and have TG to route traffic to for 
> example Allstar or just route to DMR only in my network of repeaters.
>
> I have the repeater it looks like I need a RPI2 and a DV300 it appears 
> everything else is software.
>
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086
>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151130/95a06829/attachment.html>