[Allstar Digital] AMBE audio

[John D. Hays]

You need one ThumbDV or PiDV (DV3000) per bidirectional audio channel.
Multiplexing is not supported. You can share an AMBE server but only one
stream at a time.

On Aug 23, 2016 12:37 PM, "Robert Newberry" <N1XBM at amsat.org> wrote:

> I've setup a second repeater at another site. With the addition of the
> second repeater the DMR to ASL audio is slow and very slurred. Coming from
> ASL to DMR its sounds just fine.
>
> The strange twist on all of this is the second repeater DMR<->ASL in both
> directions clean/clear audio.
>
> Is it possible I am asking too much of the DV3000 and I need to have a
> second DV3000?
>
> Other than that both the repeaters play quite well on DMR from what I have
> observed. I've looked at the debug output and I'm not seeing anything that
> indicates a problem.
>
> Thank you
>
> --
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
> www.radioguysrepeaternetwork.com
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160823/047e6d1f/attachment.html>