[Allstar Digital] Install problem dmrgateway
Robert Newberry
N1XBM at amsat.org
Sun Feb 28 13:22:20 EST 2016
root at repeater:/opt/dmrlink/ambe_audio# ls -l subscriber_ids.csv
-rw-r--r-- 1 root root 1630189 Feb 28 13:07 subscriber_ids.csv
root at repeater:/opt/dmrlink/ambe_audio# ls -l talkgroup_ids.csv
-rw-r--r-- 1 root root 256 Feb 28 13:07 talkgroup_ids.csv
So the owner has read and write, and everyone else just write.
On Sun, Feb 28, 2016 at 1:15 PM, Steve Zingman <szingman at msgstor.com> wrote:
> What are the permissions on the file?
>
> Sent via smoke signal (AT&T 4G LTE)
>
> On Feb 28, 2016, at 1:14 PM, Robert Newberry <N1XBM at amsat.org> wrote:
>
> Well I tried as you suggested I am still getting the same error. Would a
> file permission be causing this issue?
>
> File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
> from dmrlink import IPSC, NETWORK, networks, logger, int_id,
> hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH,
> get_subscriber_info, reread_subscribers
> ImportError: cannot import name get_subscriber_info
>
>
> On Sun, Feb 28, 2016 at 1:07 PM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> Try to copy it to /opt/dmrlink/ambe_audio
>>
>> Sent via smoke signal (AT&T 4G LTE)
>>
>> On Feb 28, 2016, at 12:59 PM, Robert Newberry <N1XBM at amsat.org> wrote:
>>
>> I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything
>> looks ok, I see a bunch of IDs and names. I noticed that its not executable.
>>
>>
>> On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman at msgstor.com>
>> wrote:
>>
>>> Check for subscriber_ids.csv in /opt/darling
>>>
>>> Sent via smoke signal (AT&T 4G LTE)
>>>
>>> On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM at amsat.org> wrote:
>>>
>>> OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a
>>> couple of instances. I went thru and killed duplicate processes and that
>>> errror cleared up here is the results of netstat -unap
>>>
>>> root at repeater:~# netstat -unap
>>> Active Internet connections (servers and established)
>>> Proto Recv-Q Send-Q Local Address Foreign Address
>>> State PID/Program name
>>> udp 0 0 0.0.0.0:34001 0.0.0.0:*
>>> 279/DMRGateway
>>> udp 0 0 127.0.0.1:32001 0.0.0.0:*
>>> 277/asterisk
>>> udp 0 0 0.0.0.0:31000 0.0.0.0:*
>>> 279/DMRGateway
>>> udp 0 0 0.0.0.0:50001 0.0.0.0:*
>>> 234/python
>>> udp 0 0 0.0.0.0:2460 0.0.0.0:*
>>> 221/AMBEserverGPIO
>>> udp 0 0 0.0.0.0:4569 0.0.0.0:*
>>> 277/asterisk
>>> udp 0 0 0.0.0.0:52307 0.0.0.0:*
>>> 234/python
>>> udp 0 0 0.0.0.0:53900 0.0.0.0:*
>>> 234/python
>>> udp 0 0 0.0.0.0:49823 0.0.0.0:*
>>> 279/DMRGateway
>>>
>>> ambe_audio.py will not run I still get this error.
>>>
>>> File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
>>> from dmrlink import IPSC, NETWORK, networks, logger, int_id,
>>> hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH,
>>> get_subscriber_info, reread_subscribers
>>> ImportError: cannot import name get_subscriber_info
>>>
>>> I must be missing a file? by my own screwing up of coarse!
>>>
>>>
>>> On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman at msgstor.com>
>>> wrote:
>>>
>>>> netstat-unap
>>>>
>>>> Sent via smoke signal (AT&T 4G LTE)
>>>>
>>>> On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM at amsat.org> wrote:
>>>>
>>>> So I noticed that ambe_audio.py and bridge.py were not comming up at
>>>> bootup. I ran ./rc.local and saw it was permission denied. I corrected
>>>> that. This is what I get.
>>>>
>>>> root at repeater:/etc# Traceback (most recent call last):
>>>> File "/opt/dmrlink/bridge/bridge.py", line 273, in <module>
>>>> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'],
>>>> networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP'])
>>>> File
>>>> "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374,
>>>> in listenUDP
>>>> p.startListening()
>>>> File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line
>>>> 175, in startListening
>>>> self._bindSocket()
>>>> File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line
>>>> 195, in _bindSocket
>>>> raise error.CannotListenError(self.interface, self.port, le)
>>>> twisted.internet.error.CannotListenError: Couldn't listen on
>>>> 0.0.0.0:52307: [Errno 98] Address already in use.
>>>> Traceback (most recent call last):
>>>> File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
>>>> from dmrlink import IPSC, NETWORK, networks, logger, int_id,
>>>> hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH,
>>>> get_subscriber_info, reread_subscribers
>>>> ImportError: cannot import name get_subscriber_info
>>>>
>>>>
>>>> So I think the first problem where it says it cant listen on
>>>> 0.0.0.0:52307 that has to do with my peer connection to brandmiester.
>>>> I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can
>>>> not see where that port is duplicated.
>>>>
>>>> The second issuse about can not import subscriber_info, I am not sure
>>>> where to look for that.
>>>>
>>>> On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman at msgstor.com>
>>>> wrote:
>>>>
>>>>> I checked the notes. Above the move of the ini is a cd DMRGateway
>>>>>
>>>>> Sent via smoke signal (AT&T 4G LTE)
>>>>>
>>>>> On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM at amsat.org> wrote:
>>>>>
>>>>> So I'm following the instructions from a previous email.
>>>>>
>>>>> I executed the cp command from /srv
>>>>>
>>>>> cp DMRGateway.armv7 DMRGateway
>>>>>
>>>>> I get no such file or directory. I can however see DMRGateway.armv7 in
>>>>> /srv/DMRGateway
>>>>>
>>>>> Am I just in the wrong directory?
>>>>>
>>>>> N1XBM
>>>>> Apparare Scientor
>>>>> Paratus Communicare
>>>>> Allstar Node # 27086, 41540, 41812, 42086, 42658
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Allstar-Digital mailing list
>>>>> Allstar-Digital at lists.keekles.org
>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Allstar-Digital mailing list
>>>>> Allstar-Digital at lists.keekles.org
>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>
>>>>>
>>>> _______________________________________________
>>>> Allstar-Digital mailing list
>>>> Allstar-Digital at lists.keekles.org
>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>
>>>>
>>>> _______________________________________________
>>>> Allstar-Digital mailing list
>>>> Allstar-Digital at lists.keekles.org
>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>
>>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160228/94ecfdf6/attachment.html>
More information about the Allstar-Digital
mailing list