[Allstar Digital] Cases with DV3000

[Robert Newberry]

Unless I'm missing something, the clear vilros case is too thin. There is a
cut out for the pass thru pins, but not enough thickness in the case to
allow it to be snapped back. I'll have to take measurements and check
amazon. I was just curious for anything specific you guys were using.

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658

On Jan 24, 2016 7:18 PM, "Steve Zingman" <szingman at msgstor.com> wrote:

> I cut off the "pass through" pins. I did not need them, so the Pi and the
> DV3000 fit in my cases..
>
> On 01/24/2016 03:19 PM, Robert Newberry wrote:
>
> I was putting my DV3000 together with my RPI2 and I noticed my clear
> vilros case with no longer fit together.
>
> Anyone have any case suggestions?
>
>
> _______________________________________________
> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160124/366cf0e8/attachment.html>