[Allstar Digital] DMRGateway

Steve Zingman szingman at msgstor.com
Fri Jan 29 21:51:00 EST 2016


There is no config file for chan_usrp

On 01/29/2016 09:49 PM, Robert Newberry wrote:
> Yes under /etc/asterisk modules.conf I have load => chan_usrp.so
>
> I noticed under /etc/asterisk there sisnt a chan_usrp.conf is there 
> supposed to be one? I noticted there is a simpleusb.conf. Maybe its 
> nothing I just noticed it.
>
> On Fri, Jan 29, 2016 at 9:44 PM, Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     usrp channel driver enabled in modules.conf?
>
>
>     On 01/29/2016 09:41 PM, Robert Newberry wrote:
>>     root at repeater:/opt/dmrlink/ambe_audio# python ambe_audio.py
>>     INFO DMRlink 'ambe_audio.py' (c) 2015 N0MJS & the K0USY Group -
>>     SYSTEM STARTING...
>>     INFO (N1XBM_MASTER) IPSC Instance Created: 54321, 0.0.0.0:50001
>>     <http://0.0.0.0:50001>
>>     DMRLink ambe server
>>     Send UDP frames to DMR gateway 127.0.0.1:1234 <http://127.0.0.1:1234>
>>     Remote control is listening on: repeater 1235
>>     INFO (N1XBM_MASTER) Master Registration Packet Received from peer
>>     312307, 192.168.0.202:50002 <http://192.168.0.202:50002>
>>     Voice Transmission Start on TS 2 and TG Local (2) from N1XBM
>>     Voice Transmission End 5.22 seconds
>>
>>
>>     On Fri, Jan 29, 2016 at 9:36 PM, Steve Zingman
>>     <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>
>>         set dmrlink.cfg to INFO and output to console
>>         start ambe_audio.py in the foreground.
>>         Talk on repeater
>>         What do you get on the screen?
>>         copy and paste it to message.
>>
>>
>>         On 01/29/2016 09:32 PM, Robert Newberry wrote:
>>>
>>>         So I looked a DMRGateway.ini under /etc. The ports match
>>>         what I see in DMRGateway.pdf. All of the IPs are 127.0.0.1
>>>         which I believe is correct.
>>>
>>>         I confirmed that AMBEserverGPIO is running.
>>>
>>>         As far as I know to test this I go to
>>>         /opt/dmrlink/ambe_audio  then type python ambe_audio.py
>>>
>>>         If Everything is right, I should hear myself in my node. I
>>>         am connected to my node using iaxrpt.
>>>
>>>         In ambe_audio.cfg what is the remote control port? Default
>>>         is 1235 the gateway port is 1234 which I think is the port
>>>         between dmrlink and dmrgateway.
>>>
>>>         N1XBM
>>>         Apparare Scientor
>>>         Paratus Communicare
>>>         Allstar Node # 27086, 41540, 41812, 42086, 42658
>>>
>>>         On Jan 29, 2016 5:43 AM, "Steve Zingman"
>>>         <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>>
>>>             Is AMBEserverGPIO running? Have you tested it for proper
>>>             operation?
>>>             is DMRGateway running? Are the settings in
>>>             DMRGateway.ini correct?
>>>
>>>
>>>
>>>
>>>             On 01/28/2016 10:16 PM, Robert Newberry wrote:
>>>>             So I followed instructions from previous emails.
>>>>
>>>>             I first went to my rpt.conf and did this
>>>>
>>>>             rxchannel = usrp/127.0.0.1:34001:32001
>>>>
>>>>             Then
>>>>
>>>>             Configure dmrlink.cfg in /opt/dmrlink/ambe_audio as a
>>>>             master
>>>>                 Configure the repeater to point at the Pi as a peer.
>>>>                     cd /opt/dmrlink/ambe_audio
>>>>                     Test it by running python dmrlink.py in
>>>>             ambe_audio Watch the log
>>>>                 stop dmrlink.py
>>>>                 If you have rebooted DMRGateway should be running.
>>>>                     Check it with ps ax | grep DMRGateway
>>>>                         If not start it with
>>>>             /usr/local/bin/DMRGateway &
>>>>                     Make sure asterisk is running and connect a
>>>>             node to it so you can hear it.
>>>>                 start python ambe_audio.py
>>>>
>>>>             Everything looks OK on the output, other than not
>>>>             hearing myself. I am also using TS2 TG2 which by the
>>>>             looks of the default ambe_audio.cfg in
>>>>             /opt/dmrlink/ambe_audio has TG2 in the filter.
>>>>
>>>>             Is there any other ports I need to set? It looks like
>>>>             most things are set default.
>>>>
>>>>
>>>>
>>>>             _______________________________________________
>>>>             Allstar-Digital mailing list
>>>>             Allstar-Digital at lists.keekles.org
>>>>             <mailto:Allstar-Digital at lists.keekles.org>
>>>>             http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>             -- 
>>>             "Anything is possible if you don't know what you are talking about."
>>>             1st Law of Logic
>>>
>>>
>>>             _______________________________________________
>>>             Allstar-Digital mailing list
>>>             Allstar-Digital at lists.keekles.org
>>>             <mailto:Allstar-Digital at lists.keekles.org>
>>>             http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>>>
>>>         _______________________________________________
>>>         Allstar-Digital mailing list
>>>         Allstar-Digital at lists.keekles.org
>>>         <mailto:Allstar-Digital at lists.keekles.org>
>>>         http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>         -- 
>>         "Anything is possible if you don't know what you are talking about."
>>         1st Law of Logic
>>
>>
>>         _______________________________________________
>>         Allstar-Digital mailing list
>>         Allstar-Digital at lists.keekles.org
>>         <mailto:Allstar-Digital at lists.keekles.org>
>>         http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>>
>>
>>     _______________________________________________
>>     Allstar-Digital mailing list
>>     Allstar-Digital at lists.keekles.org
>>     <mailto:Allstar-Digital at lists.keekles.org>
>>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>     -- 
>     "Anything is possible if you don't know what you are talking about."
>     1st Law of Logic
>
>
>     _______________________________________________
>     Allstar-Digital mailing list
>     Allstar-Digital at lists.keekles.org
>     <mailto:Allstar-Digital at lists.keekles.org>
>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160129/a90f4691/attachment.html>


More information about the Allstar-Digital mailing list