[Allstar Digital] DMRGateway

[Robert Newberry]

OK sorry, just need to clarify. Currently under
/opt/dmrlink/ambe_audio/dmrlink.cfg my repeater is currently a peer to
dmrlink. So should I also create a peer in that same file? Sorry I'm a
little confused.

On Fri, Jan 29, 2016 at 9:57 PM, Steve Zingman <szingman at msgstor.com> wrote:

> Build a master, point your repeater at it. change ambe_audio from a master
> to a peer. point it at the new master
>
>
> On 01/29/2016 09:55 PM, Robert Newberry wrote:
>
> I just went back and reconfirmed it. 42657 is the only node I have defined
> in rpt.conf
>
> On Fri, Jan 29, 2016 at 9:52 PM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> Is rxchannel = usrp/127.0.0.1:34001:32001 the only rxchannel defined in
>> rpt.conf?
>>
>> On 01/29/2016 09:49 PM, Robert Newberry wrote:
>>
>>> rxchannel = usrp/127.0.0.1:34001:32001
>>>
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>
>
>
> _______________________________________________
> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160129/e9016e17/attachment.html>