[Allstar Digital] First attempt

[Michael J. Wolthuis]

Steve,
That’s what I started with – I am certain, but will start again fresh tomorrow with a new card.

Mike


From:  Allstar-Digital <allstar-digital-bounces at lists.keekles.org> on behalf of Steve Zingman <szingman at msgstor.com>
Organization:  MSGStor
Reply-To:  Digital linking using Asterisk and app_rpt <allstar-digital at lists.keekles.org>
Date:  Saturday, January 30, 2016 at 10:52 PM
To:  Digital linking using Asterisk and app_rpt <allstar-digital at lists.keekles.org>
Subject:  Re: [Allstar Digital] First attempt

    
 You should be using the RPi1 image pointed to on the front page.
 <https://github.com/N4IRS/AllStar>
 
 Here is a link to the image:
<http://downloads.raspberrypi.org/raspbian/images/raspbian-2014-12-25/2014-12-24-wheezy-raspbian.zip>
 
 
 
On 01/30/2016 10:49 PM, Michael J. Wolthuis wrote:
 
 
 
 
 
Thanks Steve,
 
I am having a couple issues with RPI1, should have probably used RPI2.
 

 
 
The allstar install scripts I’m using are yours also.
 

 
 
/srv/scripts/build_dahdi.sh
 
This command returns:
 
 

You do not appear to have the sources for the 4.1.16+ kernel installed.
 
 
 
 

 
 
This appears to finish fine, but no Asterisk binary that I can locate.
 
 

/srv/scripts/build_asterisk.sh 
 
 

 
 
So, struggling a bit on the Pi1.
 

 
 
Thanks for any pointers,
 
Mike
 

 
 

 
  
From:  Allstar-Digital <allstar-digital-bounces at lists.keekles.org> on behalf of Steve Zingman <szingman at msgstor.com>
 Organization:  MSGStor
 Reply-To:  Digital linking using Asterisk and app_rpt <allstar-digital at lists.keekles.org>
 Date:  Saturday, January 30, 2016 at 10:28 PM
 To:  Digital linking using Asterisk and app_rpt <allstar-digital at lists.keekles.org>
 Subject:  Re: [Allstar Digital] First attempt
 
 

 
 
  
 ah,
 I need to check, but I may have to build a executable for you for the RPi1
 I'll get back to you.
 
 Steve
 
 
On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote:
 
 
 
 
 
My first attempt to start up /usr/local/bin/DMRGateway &
 
 
 

 
 
I get Segmentation Fault immediately.  
 

 
 
Anyone else had that issue?
 

 
 
I have DMRLink working as a peer, connected to our C-Bridge.
 

 
 
I have AMBEserverGPIO working and listening on UDP.
 

 
 
Do not yet have Asterisk started, is that the issue?
 

 
 
Mike
 
kb8zgl
 

 
 
  
 
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
 
 
 
-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
 
 
 _______________________________________________ Allstar-Digital mailing list Allstar-Digital at lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital  
  
 
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
 
 
 
-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
 
_______________________________________________ Allstar-Digital mailing list Allstar-Digital at lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160130/74428a26/attachment.html>