[Allstar Digital] DMRGateway 2Way open Beta test Install notes
Ryan Turner, K0RET
ryan.turner at memhamwan.org
Sun Mar 6 00:40:53 EST 2016
Thanks for the tip Michael. Looks like AMBEserverGPIO isn't working quite
right:
service AMBEserverGPIO status
● AMBEserverGPIO.service - LSB: Provide AMBE Encode/Decode
Loaded: loaded (/etc/init.d/AMBEserverGPIO)
Active: active (exited) since Sat 2016-03-05 21:54:36 CST; 1h 26min ago
Mar 05 21:54:36 HamWAN-DMR-Bridge AMBEserverGPIO[210]: Starting
AMBEserverGPIO
Mar 05 21:54:36 HamWAN-DMR-Bridge AMBEserverGPIO[210]: Reset DV3000
Mar 05 21:54:36 HamWAN-DMR-Bridge systemd[1]: Started LSB: Provide AMBE
Encode/Decode.
Mar 05 21:54:38 HamWAN-DMR-Bridge AMBEserverGPIO[210]: AMBEserver: unknown
byte from the DV3000, 0x86AMBEserver: unknown byte from the DV3000,
0x84AMBEserver: unknown byte from the DV3000, 0xFDAMBEserver: error when
re...al port, errno=0
Mar 05 23:19:52 HamWAN-DMR-Bridge systemd[1]: Started LSB: Provide AMBE
Encode/Decode.
Mar 05 23:20:05 HamWAN-DMR-Bridge systemd[1]: Started LSB: Provide AMBE
Encode/Decode.
Mar 05 23:20:18 HamWAN-DMR-Bridge systemd[1]: Started LSB: Provide AMBE
Encode/Decode.
Mar 05 23:20:26 HamWAN-DMR-Bridge systemd[1]: Started LSB: Provide AMBE
Encode/Decode.
Hint: Some lines were ellipsized, use -l to show in full.
Which then lead me to:
python /srv/DV3000/AMBEtest2.py
Traceback (most recent call last):
File "/srv/DV3000/AMBEtest2.py", line 6, in <module>
import RPi.GPIO as GPIO
ImportError: No module named RPi.GPIO
So, I then installed:
apt-get install python-dev python-pip
pip install rpi.gpio
Reran the test, received this:
python /srv/DV3000/AMBEtest2.py
d
8
N
1
False
False
False
0
Traceback (most recent call last):
File "/srv/DV3000/AMBEtest2.py", line 44, in <module>
rcv = port.read(10)
File "/usr/lib/python2.7/dist-packages/serial/serialposix.py", line 460,
in read
raise SerialException('device reports readiness to read but returned no
data (device disconnected?)')
serial.serialutil.SerialException: device reports readiness to read but
returned no data (device disconnected?)
Then I found that /boot/cmdline.txt still had "console=ttyAMA0,115200" in
it, so I removed that; I also noticed that NW Digital's recommended
"init_uart_clock=50000000" addition to /boot/config.txt wasnt done either
-- fixed that and rebooted.
Once I did that, the test passed:
python /srv/DV3000/AMBEtest2.py
d
8
N
1
False
False
False
0
a9
Reset
6100010033
Wrote: 5 bytes
a9
Product ID
6100010030
Wrote: 5 bytes
a
0AMBE3000R
Version
6100010031
Wrote: 5 bytes
a11V120.E100.XXXX.C106.G514.R009.B0010411.C0020208
Set DSTAR Mode
61000c000a013007634000000000000048
Wrote: 17 bytes
a
Ran *DMRGateway and now I'm up and running. DMRlink isn't playing quite
right, but I can at least troubleshoot that ;)*
*Thanks!*
On Sat, Mar 5, 2016 at 10:15 PM, Michael Hebert <mhebert1975 at gmail.com>
wrote:
> *sudo /usr/sbin/service AMBEserverGPIO start*
>
>
> *DMRGateway &*
>
> On Sat, Mar 5, 2016 at 10:11 PM, Ryan Turner, K0RET <
> ryan.turner at memhamwan.org> wrote:
>
>> Figured I'd offer more insight --
>> lsof -i
>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
>> sshd 223 root 3u IPv4 590 0t0 TCP *:222 (LISTEN)
>> asterisk 272 root 7u IPv4 10124 0t0 TCP localhost:5038
>> (LISTEN)
>> asterisk 272 root 11u IPv4 10127 0t0 UDP *:iax
>> sshd 313 root 3u IPv4 795 0t0 TCP 10.0.7.107:222->
>> 10.0.7.227:57584 (ESTABLISHED)
>> wget 15186 root 7u IPv4 10124 0t0 TCP localhost:5038
>> (LISTEN)
>> wget 15186 root 11u IPv4 10127 0t0 UDP *:iax
>> wget 15186 root 31u IPv4 24475 0t0 TCP 10.0.7.107:39745
>> ->cyclonus.mozone.net:http (ESTABLISHED)
>> wget 15187 root 7u IPv4 10124 0t0 TCP localhost:5038
>> (LISTEN)
>> wget 15187 root 11u IPv4 10127 0t0 UDP *:iax
>> wget 15187 root 31u IPv4 27731 0t0 TCP 10.0.7.107:39744
>> ->cyclonus.mozone.net:http (ESTABLISHED)
>>
>> So, based on
>> https://github.com/N4IRS/DMRGateway/blob/master/DMRGatewayDiagram.pdf,
>> I'm missing it all. So, my AMBEserverGPIO isnt running either. If someone
>> can give me a date/subject for a previous thread covering how to start
>> DMRGateway, I'd be very grateful.
>>
>> On Sat, Mar 5, 2016 at 9:59 PM, Ryan Turner, K0RET <
>> ryan.turner at memhamwan.org> wrote:
>>
>>> So, I did the following:
>>>
>>> - Setup an rpi2 with DIAL and a DV3000
>>> - SSH'd to the rpi2 as debian:debian, su'd, went through the allstar
>>> setup; got the node live
>>> - wget --no-check-certificate
>>> https://raw.githubusercontent.com/N4IRS/DMRGateway/master/dmr_install.sh
>>> - restarted
>>> - /etc/DMRGateway.ini looked fine unchanged
>>> - /opt/dmrlink/ambe_audio/ambe_audio.cfg looked fine unchanged
>>> - /opt/dmrlink/ambe_audio/dmrlink.cfg updated the following in order
>>> to peer with my ipsc net:
>>> - radio ID
>>> - port
>>> - ip
>>> - auth_key
>>> - master_ip
>>> - master_port
>>>
>>> Now, the question is, what do I do? Apparently I missed some discussion
>>> covering the initial setup/use of this tool, and this is as far as I've
>>> been able to piece together from reviewing the archives. Any help would be
>>> appreciated!
>>>
>>> On Thu, Mar 3, 2016 at 9:13 PM, Ryan Turner, K0RET <
>>> ryan.turner at memhamwan.org> wrote:
>>>
>>>> Yep, i've already got an account and a few nodes. Just wanted to make
>>>> sure that that was what your scripts expected.
>>>>
>>>> Thanks, will get rolling on it now.
>>>>
>>>> On Thu, Mar 3, 2016 at 8:50 PM, Robert Newberry <N1XBM at amsat.org>
>>>> wrote:
>>>>
>>>>> If you go to www.allstarlink.org you'll see the image for the RPI2.
>>>>> You can also setup an account to get a node number if you don't have one
>>>>> already.
>>>>>
>>>>> N1XBM
>>>>> Apparare Scientor
>>>>> Paratus Communicare
>>>>> Allstar Node # 27086, 41540, 41812, 42086, 42658
>>>>>
>>>>> On Mar 3, 2016 9:41 PM, "Ryan Turner, K0RET" <
>>>>> ryan.turner at memhamwan.org> wrote:
>>>>>
>>>>>> Hey Steve,
>>>>>>
>>>>>> Assuming I have an RPi, whats the preferred image to use? Based on
>>>>>> reading the .rtf file and viewing the scripts, I need to have Asterisk
>>>>>> running already setup for an allstar server and node, right?
>>>>>>
>>>>>> Sorry for the stupid questions. Finally got my hands on a DV3000 and
>>>>>> I want to get this up and running.
>>>>>>
>>>>>> On Wed, Feb 24, 2016 at 12:10 PM, Steve Zingman <szingman at msgstor.com
>>>>>> > wrote:
>>>>>>
>>>>>>> Assuming existing install
>>>>>>>
>>>>>>> cd /srv
>>>>>>>
>>>>>>> mv DMRGateway DMRGateway.old
>>>>>>> git clone https://github.com/N4IRS/DMRGateway.git
>>>>>>>
>>>>>>> cd DMRGateway
>>>>>>> mv /etc/DMRGateway.ini /etc/DMRGateway.old
>>>>>>>
>>>>>>> Assuming you are running a RPi2
>>>>>>> cp DMRGateway.armv7 DMRGateway
>>>>>>>
>>>>>>> ./install.sh
>>>>>>>
>>>>>>> cd /srv
>>>>>>> mv ambe_audio_2way ambe_audio_2way.old
>>>>>>> git clone -b ambe_audio_2way https://github.com/n0mjs710/DMRlink.git
>>>>>>>
>>>>>>> cd /srv/DMRlink
>>>>>>> cp ambe_audio.cfg /opt/DMRlink/ambe_audio
>>>>>>> cp ambe_audio.py /opt/DMRlink/ambe_audio
>>>>>>> cp dmrlink.cfg /opt/DMRlink/ambe_audio
>>>>>>> cp dmrlink.py /opt/DMRlink/ambe_audio
>>>>>>> cp template.bin /opt/DMRlink/ambe_audio
>>>>>>>
>>>>>>> Edit /etc/DMRGateway.ini to taste
>>>>>>> Edit /opt/DMRlink/ambe_audio/ambe_audio.cfg to taste
>>>>>>> Edit /opt/DMRlink/ambe_audio/dmrlink.cfg to taste
>>>>>>>
>>>>>>> Read the comments in the config files
>>>>>>>
>>>>>>>
>>>>>>> See:
>>>>>>> <
>>>>>>> https://github.com/N4IRS/DMRGateway/raw/master/DMRGatewayDiagram.pdf
>>>>>>> >
>>>>>>> <https://github.com/N4IRS/DMRGateway/raw/master/DMRGateway.rtf>
>>>>>>> <
>>>>>>> https://github.com/N4IRS/DMRGateway/raw/master/DMRGatewayTechOverview.pdf
>>>>>>> >
>>>>>>> _______________________________________________
>>>>>>> Allstar-Digital mailing list
>>>>>>> Allstar-Digital at lists.keekles.org
>>>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Ryan Turner, K0RET
>>>>>> +1.901.300.0039
>>>>>>
>>>>>> HamWAN Memphis Metro <http://www.memhamwan.org/> - Memphis' Amateur
>>>>>> Radio Multi-Megabit IP Network
>>>>>>
>>>>>> _______________________________________________
>>>>>> Allstar-Digital mailing list
>>>>>> Allstar-Digital at lists.keekles.org
>>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> Allstar-Digital mailing list
>>>>> Allstar-Digital at lists.keekles.org
>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Ryan Turner, K0RET
>>>> +1.901.300.0039
>>>>
>>>> HamWAN Memphis Metro <http://www.memhamwan.org/> - Memphis' Amateur
>>>> Radio Multi-Megabit IP Network
>>>>
>>>
>>>
>>>
>>> --
>>> Ryan Turner, K0RET
>>> +1.901.300.0039
>>>
>>> HamWAN Memphis Metro <http://www.memhamwan.org/> - Memphis' Amateur
>>> Radio Multi-Megabit IP Network
>>>
>>
>>
>>
>> --
>> Ryan Turner, K0RET
>> +1.901.300.0039
>>
>> HamWAN Memphis Metro <http://www.memhamwan.org/> - Memphis' Amateur
>> Radio Multi-Megabit IP Network
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
--
Ryan Turner, K0RET
+1.901.300.0039
HamWAN Memphis Metro <http://www.memhamwan.org/> - Memphis' Amateur Radio
Multi-Megabit IP Network
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160305/b776a7de/attachment.html>
More information about the Allstar-Digital
mailing list