[Allstar Digital] DMRGateway more testing

[Robert Newberry]

I have been using ASL to steer to Area 3 on BM to do some testing with
N3FE. We noticed some things.

The audio delay starts out at about 1-2 seconds then goes to about 20
seconds. I know a while back Steve mentioned turning back all of the
logging, which I did.

Sometimes not all audio from analog makes it to DMR. Could this have
something to do with maybe slot being busy that the particular ID uses?

I think this has already been addressed Cory noted a tail on the DMR side,
I've turned all of that off in the rpt.conf, but I believe you mentioned
there is a tail being introduced by usrp.

The last I doubt there's much that can be done. The quality of audio is
quite usable but does sound different than dmr to dmr, with the same
person. A non technical description was "squashed".

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
www.radioguysrepeaternetwork.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160517/5bc8fc50/attachment.html>