[Allstar Digital] DMRGateway / DMRGui / DMRLink /ambe_audio / DV3000u/PiDV

[Steve Zingman]

Guy,
I do not have the first generation ThumbDV. Could you try with the -n 
switch and when it fails, try with the -n switch? No reboot between tests.

Steve

On 4/4/2017 9:18 PM, Guy Vachon VE2VAG wrote:
> Richard,
> I was having the same problem as you, since I own a first generation 
> ThumbDV which runs at 230400 bauds.
> When I removed the –n argument in the command: *python AMBEtest3.py -n 
> -s /dev/ttyUSB0, *it then worked for me.
> So for people with first generation ThumbDV’s, the command *python 
> AMBEtest3.py -s /dev/ttyUSB0 *must be used.
> Also, on page 3, Steve says at point 8: DO NOT edit DMRGateway.ini 
> UNLESS your DV is not at /dev/ttyUSB0
> If you run a first gen ThumbDV, the baud rate must be changed in it 
> also to 230400.
> And for Steve: thank you very much for all the efforts in the software 
> and the documents.  I went thru it all, and except for the items 
> mentionned up here, everything went well and I’m ready for the next steps.
> Thanks and 73s from Guy VE2VAG
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170405/c4f77610/attachment.html>