[Allstar Digital] DMRGateway / DMRGui / DMRLink /ambe_audio / DV3000u /PiDV

[Steve Zingman]

Peter,
Do the following
cd /srv/DMRlink
git pull
You should see it update ambe_audio.py
Make sure ambe_audio.py is not running.
cp ambe_audio.py /opt/dmrlink/ambe_audio/ambe_audio.py

Try agan and PLEASE report.

Steve

On 4/5/2017 9:28 AM, Peter wrote:
> Steve,
>
> Think I've made some progress, have it almost running, when I push the
> PTT on my linked ASL box, DMRLink crashed and ambe_audio generates an error.
>
> Is this being caused by the problem with ambe-audio you told us about ?
>
> root at mmdvm0:/opt/DMRGateway# ./DMRGateway DMRGateway.ini
> DMRLink Gateway
> Setting [GENERAL] outputAudioDevice -> /dev/null
> Setting [GENERAL] inputAudioDevice -> /dev/null
> Setting [GENERAL] decoderFallBack -> false
> Setting [GENERAL] useMicrophone -> false
> Setting [GENERAL] useVox -> true
> Setting [GENERAL] voxDecay -> 2
> Setting [GENERAL] voxTrigger -> 200
> Setting [AMBE_AUDIO] server -> 127.0.0.1
> Setting [AMBE_AUDIO] fromDMRPort -> 31000
> Setting [AMBE_AUDIO] toDMRPort -> 31003
> Setting [USRP] server -> 192.168.168.10
> Setting [USRP] toASLPort -> 32001
> Setting [USRP] fromASLPort -> 34001
> Setting [USRP] aslAudio -> AUDIO_USE_AGC
> Setting [USRP] agcGain -> -20
> Setting [USRP] dmrAudio -> AUDIO_USE_BPF
> Setting [USRP] dmrGain -> 0.35
> Setting [DV3000] server -> /dev/ttyUSB0
> Setting [DV3000] port -> 460800
> Setting [DV3000] serial -> true
> ioctl reset error
> ioctl speed error
> ioctl stereo error
> ioctl setfmt error
> Audio In/Out Device: /dev/null
> Open UDP listener on 127.0.0.1:31000
> Open USRP on 192.168.168.10:32001
> Begin DV3000 decode
> Using hardware AMBE decoder
> Starting DMRLink --> USRP thread
> Open UDP listener on 192.168.168.10:34001
> Starting USRP --> DMRLink thread
> Connected (PTT asserted)
> root at mmdvm0:/opt/DMRGateway#
>
>
> root at mmdvm0:/opt/dmrlink/ambe_audio# python ambe_audio.py
> INFO DMRlink 'ambe_audio.py' (c) 2015 N0MJS & the K0USY Group - SYSTEM
> STARTING...
> INFO ID ALIAS MAPPER: 'peer_ids.csv' is current, not downloaded
> INFO ID ALIAS MAPPER: 'subscriber_ids.csv' is current, not downloaded
> INFO ID ALIAS MAPPER: peer_ids dictionary is available
> INFO ID ALIAS MAPPER: subscriber_ids dictionary is available
> INFO ID ALIAS MAPPER: talkgroup_ids dictionary is available
> INFO (BM) IPSC Instance Created: 2351832, 0.0.0.0:50000
> INFO section = BM
> INFO debug = False
> INFO outToFile = False
> INFO outToUDP = True
> INFO gateway = 127.0.0.1
> INFO toGatewayPort = 31000
> INFO remoteControlPort = 31002
> INFO fromGatewayPort = 31003
> INFO gatewayDmrId = 2342425
> INFO tgFilter = 23520
> INFO txTg = 23520
> INFO txTs = 2
> INFO DMRLink ambe server
> INFO Send UDP frames to DMR gateway 127.0.0.1:31000
> INFO (BM) Registering with the Master: 91.121.101.163:55001
> INFO Remote control is listening on mmdvm0.localdomain:31002
> WARNING (BM) Registration response (we requested reg) from the Master:
> 2342, 91.121.101.163:55001 (1 peers)
> INFO (BM), No Peer List - Requesting One From the Master
> Unhandled exception in thread started by <bound method
> ambeIPSC.launchUDP of <__main__.ambeIPSC instance at 0x7643ce68>>
> Traceback (most recent call last):
>     File "ambe_audio.py", line 280, in launchUDP
>       self.playbackFromUDP(_sock, self._system)
> TypeError: playbackFromUDP() takes exactly 2 arguments (3 given)
> ^CINFO *** DMRLINK IS TERMINATING WITH SIGNAL 2 ***
> INFO De-Registering from IPSC BM
> root at mmdvm0:/opt/dmrlink/ambe_audio#
>
>
>
>
>
>
> On 04/04/2017 12:25, Peter wrote:
>> Thanks Steve, looking forward to this.
>>
>> 73
>> Peter G7RPG
>>
>>
>> On 03/04/2017 14:54, Steve Zingman wrote:
>>>    As some of you know, Cort N0MJS has made major improvements to
>>> DMRlink. At some point the changes broke ambe_audio. ambe_audio is
>>> needed to get AMBE in and out of the DMR network. Last week Cort made
>>> a change to ambe_audio. We do not know if this fixed all issues.
>>>
>>>    I am going to write a step by step document on getting DMRGateway /
>>> DMRlink running from dead start. I will start with a Raspberry Pi 2
>>> and a DV3000u. The base image with be DIAL RC1. I will start with
>>> verifying communications with the DV300u. I will try to go step by
>>> step to get the individual modules running. Once DV3000u, DMRGateway,
>>> DMRlink and ambe_audio are running, I'll make the rpt.conf to connect
>>> ASL to DMRGateway. The primarily reference will be the
>>> DMRGatewayDiagram.pdf document on github and dvswitch.net.
>>>
>>>    I expect this will take about a week to complete. The changes to
>>> DMRlink do not effect the installation of the other modules. If I run
>>> into bugs, we will fix them before going forward. The order of install
>>> will be DV3000u, DMRGateway, DMRlink / ambe_audio, ASL.
>>>
>>> For DVSwitch, 73 Steve N4IRS
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital