[Allstar Digital] New MMDVM Audio board to debut. INADVM

[Steve Zingman]

Kevin has created a web site for information and ordering.
<http://inadvm.com/inadvm/inadvm-index.html>

73, Steve N4IRS

On 4/19/2017 10:03 PM, David KE6UPI wrote:
> Thanks Steve, Put me down for one.
>
> David
>
> On Wed, Apr 19, 2017 at 5:55 PM, Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     David,
>     No, it's a audio board that sits on the Arduino Due. The Due is a
>     proven platform when paired with a good audio board. Later revs
>     will support other processors. But that is a ways off.
>     The boards have been received and are being tested. Should be
>     available in the next week or so.
>
>     Steve
>
>
>     On 04/19/2017 08:50 PM, David KE6UPI wrote:
>>     Hey Steve, Are you guy making a board that goes on a RasPi and
>>     bypass the Arduino?
>>
>>     David
>>     KE6UPI
>>
>>     On Thu, Apr 6, 2017 at 8:27 AM, Steve Zingman
>>     <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>
>>         Due to the nature of the list, I think this is a appropriate
>>         place to make a advanced product announcement.
>>
>>         Kevin W3KKC, Mike N4IRR and I have been working on a line of
>>         MMDVM audio boards called INADVM. The product is produced and
>>         shipped from the US.  The first version of the board is for
>>         the Arduino Due. It uses multi-turn pots for receive and
>>         transmit audio. The radio connector is a DB-9. A 12 MHz TCXO
>>         is included. On the board are LEDs for Power, PTT and Data
>>         detect. Now or the fun part. The design is through hole (not
>>         surface mount) except for the the voltage regulator and the
>>         TCXO. Those 2 parts will be pre-mounted the rest of the board
>>         will be a kit. You will receive the PC board with the
>>         regulator and TCXO mounted and all the parts needed,
>>         schematic and board layout. All ready to assemble. No surface
>>         mounted parts to solder. Sockets for the ICs. There will be a
>>         Assembled and Tested version also.
>>
>>         Pricing:
>>         $35 for the kit plus shipping.
>>         $50 A&T plus shipping.
>>
>>         The official introduction will be at the Dayton Hamfest. If
>>         possible We will have kits available before that.
>>         Sales will be through <http://www.masterscommunications.com/
>>         <http://www.masterscommunications.com/>>
>>
>>
>>         -- 
>>         "Real programmers us vi, that's why I use nano"
>>         _______________________________________________
>>         Allstar-Digital mailing list
>>         Allstar-Digital at lists.keekles.org
>>         <mailto:Allstar-Digital at lists.keekles.org>
>>         http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>         <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital>
>>
>>
>>
>>
>>     _______________________________________________
>>     Allstar-Digital mailing list
>>     Allstar-Digital at lists.keekles.org
>>     <mailto:Allstar-Digital at lists.keekles.org>
>>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>     <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital>
>     _______________________________________________ Allstar-Digital
>     mailing list Allstar-Digital at lists.keekles.org
>     <mailto:Allstar-Digital at lists.keekles.org>
>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>     <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital> 
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170420/cf5b2a80/attachment.html>