[Allstar Digital] All-star to Dstar and back

[Steve Zingman]

Ryan,
As of today there is a limited solution that only runs on the x86. I'll 
let someone else who knows it better describe it. The way I think it 
should be done is like how we did DMRGateway. Use the USRP channel 
driver in ASL.Modify DummyRepeater to output PCM instead of analog audio 
and to accept PCM rather then analog audio. connect that to the USRP 
channel driver. That way you can use ircDDBGateway and all the other 
modern D-Star tools. Yes, you will still need the DV3000.

73, Steve N4IRS

On 03/13/2017 09:54 PM, Ryan Collier wrote:
> What is the best way to get this done? I have an xlxd reflector with a 
> dv3000 and many dstar boards. What is the best way to get this done? I 
> would rather have software not software and hardware. I know I will 
> probably need the dv3000 board. But just need the piece to connect the 
> two together. I just don't want to have to run a usb fob to a dstar board.
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170313/6b4905b9/attachment.html>