[Allstar Digital] Use a 3 amp or more PS when using a ThumbDV on a Raspberry Pi3

[John D. Hays]

3 Amp supplies are recommended for RPi 3 and if you are running higher
power USB devices.

On May 15, 2017 20:04, "(KP4TR)Ramon Gonzalez" <kp4tr.ramon at gmail.com>
wrote:

> All,
>
> I just went thru hell and back with the ThumbDV.
>
> Use a 3 amp 5V power supply on the Raspberry Pi3, especially with Wifi and
> bluetooth built in. I was using a 2 amp and with ThumbDV on a Rpi3 its not
> sufficient.
>
> Especially when the ThumbDv worked fine and 30 seconds later it distorted.
> Well thats about when the wifi starts looking for a connection, drawing
> power.
>
> See you all in Dayton!
>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170515/1f37adbb/attachment.html>