From Bryan at illiana.net Tue Dec 27 04:39:29 2005 From: Bryan at illiana.net (Bryan Fields) Date: Mon, 26 Dec 2005 22:39:29 -0600 Subject: [App_rpt] test Message-ID: <200512262239.30827.Bryan@illiana.net> -- Bryan Fields Chief RF Engineer/Partner illiana.net 219-306-1805 From hwstar at rodgers.sdcoxmail.com Tue Dec 27 04:45:29 2005 From: hwstar at rodgers.sdcoxmail.com (Steve Rodgers) Date: Mon, 26 Dec 2005 20:45:29 -0800 Subject: [App_rpt] test message with correct url Message-ID: <200512262045.29776.hwstar@rodgers.sdcoxmail.com> Second test message From Bryan at illiana.net Tue Dec 27 18:54:34 2005 From: Bryan at illiana.net (Bryan Fields) Date: Tue, 27 Dec 2005 12:54:34 -0600 Subject: [App_rpt] Zaptel PCI card source Message-ID: <200512271254.37687.Bryan@illiana.net> Where can I buy one of these cards? I emailed the link on the zaptel site, but it bounced back. I just found some cheep adtran 600 channel banks so I might decide to go this route. Thanks -- Bryan Fields Chief RF Engineer/Partner illiana.net 219-306-1805 From hwstar at rodgers.sdcoxmail.com Tue Dec 27 19:03:35 2005 From: hwstar at rodgers.sdcoxmail.com (Steve Rodgers) Date: Tue, 27 Dec 2005 11:03:35 -0800 Subject: [App_rpt] Zaptel PCI card source In-Reply-To: <200512271254.37687.Bryan@illiana.net> References: <200512271254.37687.Bryan@illiana.net> Message-ID: <200512271103.35151.hwstar@rodgers.sdcoxmail.com> You can purchase the cards through me. They are $495.00 each and shipping is $15.00. I am using one of these cards on node 2010. If you can get a Digium T1 adapter for cheap, the adtran channel banks might be worth a try. Jim uses an Adtran FXS/FXO unit in his setup. I use CAC AB1 FXS channel banks in a 3 of my setups and they work perfect. We've bought several CAC AB1 channel banks off of E-bay for $50.00ea. Steve. On Tuesday 27 December 2005 10:54, Bryan Fields wrote: > Where can I buy one of these cards? I emailed the link on the zaptel site, > but it bounced back. > > I just found some cheep adtran 600 channel banks so I might decide to go > this route. > > Thanks From Bryan at illiana.net Tue Dec 27 20:05:03 2005 From: Bryan at illiana.net (Bryan Fields) Date: Tue, 27 Dec 2005 14:05:03 -0600 Subject: [App_rpt] Zaptel PCI card source In-Reply-To: <200512271103.35151.hwstar@rodgers.sdcoxmail.com> References: <200512271254.37687.Bryan@illiana.net> <200512271103.35151.hwstar@rodgers.sdcoxmail.com> Message-ID: <200512271405.06212.Bryan@illiana.net> On Tuesday 27 December 2005 01:03 pm, Steve Rodgers wrote: > If you can get a Digium T1 adapter for cheap, ?the adtran channel banks > might be worth a try. Jim uses an Adtran FXS/FXO unit in his setup. ?I use > CAC AB1 FXS channel banks in a ?3 of my setups and they work perfect. We've > bought several CAC AB1 channel banks off of E-bay for $50.00ea. Cool, The reason I am looking to buy this card instead of the radio card is our PBX just died in the office, and we are probably going to replace it with asterisk, but need to use analog lines for the next 3-6 months until the t1 is turned up. Which means I am able to play with the app_rpt setup on the company's dime..... Can the card be used for data as well? I would like to use one of the t1's for a data T1 in the future. -- Bryan Fields Chief RF Engineer/Partner illiana.net 219-306-1805 From hwstar at rodgers.sdcoxmail.com Tue Dec 27 20:23:53 2005 From: hwstar at rodgers.sdcoxmail.com (Steve Rodgers) Date: Tue, 27 Dec 2005 12:23:53 -0800 Subject: [App_rpt] Zaptel PCI card source In-Reply-To: <200512271405.06212.Bryan@illiana.net> References: <200512271254.37687.Bryan@illiana.net> <200512271103.35151.hwstar@rodgers.sdcoxmail.com> <200512271405.06212.Bryan@illiana.net> Message-ID: <200512271223.53809.hwstar@rodgers.sdcoxmail.com> Bryan, To use the channel bank, you will need an ARIB board to interface to your repeater. I sell these wired and tested for $100.00 plus $10.00 shipping, or if you want to build your own, the board blank is $10.00 plus $10.00 shipping. The parts kit from Digi-key will cost appx. $60.00 excluding shipping. I don't know the answer about data and voice on the same T1. I've never set one up this way. Maybe someone on the Asterisk mailing list could help? Steve WA6ZFT On Tuesday 27 December 2005 12:05, Bryan Fields wrote: > On Tuesday 27 December 2005 01:03 pm, Steve Rodgers wrote: > > If you can get a Digium T1 adapter for cheap, ?the adtran channel banks > > might be worth a try. Jim uses an Adtran FXS/FXO unit in his setup. ?I > > use CAC AB1 FXS channel banks in a ?3 of my setups and they work perfect. > > We've bought several CAC AB1 channel banks off of E-bay for $50.00ea. > > Cool, The reason I am looking to buy this card instead of the radio card is > our PBX just died in the office, and we are probably going to replace it > with asterisk, but need to use analog lines for the next 3-6 months until > the t1 is turned up. Which means I am able to play with the app_rpt setup > on the company's dime..... > > Can the card be used for data as well? I would like to use one of the t1's > for a data T1 in the future.