[App_rpt] RE : Interface questions

[f6hqz-m at hamwlan.net]

Hello friends,

You can also consider the price of a Digium TDM2460B (24 FXS channels) or
TDM2460E (same with hardware echocan) or with minus quad FXS modules
(scalable from 4 to 24 channels by 4 lines step) against a T1+channel bank.
It's how I do here without any issue.

Or wait a little for the new Digium TDM which must replace the "old" TDM400P
serie.
It will accept 4 old one line only modules (for TDM400P) or 2 new "quad"
modules (for TDM2400P) + an optional echocan module derivated from the
TDM2400P but with minus chips due to the module number reduction.

73,
F6HQZ,
Francois BERGERET.


-----Message d'origine-----
De : app_rpt-bounces at lists.illiana.net
[mailto:app_rpt-bounces at lists.illiana.net] De la part de Jon Teh
Envoyé : mercredi 28 juin 2006 04:14
À : Asterisk Repeater Controler
Cc : Jon Teh
Objet : Re: [App_rpt] Interface questions
...SNIP...
> 
> As long as the FXS device is seen as a Zaptel device in Asterisk, it 
> will work
> with app_rpt. In our systems, we use ARIB cards with Digium TE110p/T100p
T1 
> cards and a channel bank. It doesn't matter which driver is required as
long 
> is it is a Zaptel driver.
> 

Ah okay, that clears it up a little. I was planning on saving up for quad
radio card, especially for its DCS and CTCSS capabilities. However, I have
been offered a T1 card and channel bank for an unrefusable price, so I'm
probably going that way.


Regards,

Jon
_______________________________________________
App_rpt mailing list
App_rpt at lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt