[App_rpt] how much processor and memory are needed

[Stephen Rodgers]

Dual processors aren't going to help much unless the thread model is
native (NTPL). Each channel uses a thread, and if the threads are not
managed at the linux kernel level, two processors would be a waste.


Eric Fort wrote:
> How would dual processor affect this? Say a dual p3 or core duo proc.
> 
> Eric
> 
> On 4/21/07, Stephen Rodgers <hwstar at rodgers.sdcoxmail.com> wrote:
>>
>> Eric,
>>
>> There's not enough information in your list to know for sure. It would
>> depend on codecs used, processor cache, RAM, and processor type. I'd
>> just try a machine and if it runs out of gas, upgrade it. I would not
>> waste my time with anything under 1Ghz.
>>
>>
>> Eric Fort wrote:
>> > What hardware specs would be recomended for an app-rpt box containing
>> the
>> > following:
>> >
>> > 1 - quad pci radio card
>> > 1 - tdm-400 fully populated
>> > 1 - voip autopatch
>> > 1 - sip telephone attached
>> > 3 - conferences (yes this eats processor)
>> > links to other allstar nodes
>> >
>> > Eric
>> >
>> >
>> >
>> ------------------------------------------------------------------------
>> >
>> > _______________________________________________
>> > App_rpt mailing list
>> > App_rpt at lists.illiana.net
>> > http://lists.illiana.net/mailman/listinfo/app_rpt
>>
>> _______________________________________________
>> App_rpt mailing list
>> App_rpt at lists.illiana.net
>> http://lists.illiana.net/mailman/listinfo/app_rpt
>>
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt