From w4wwm at bellsouth.net Tue Aug 14 05:45:43 2007 From: w4wwm at bellsouth.net (wrightwill) Date: Tue, 14 Aug 2007 00:45:43 -0500 Subject: [App_rpt] new e-mail Message-ID: <1187070344.3011.6.camel@localhost.localdomain> Hello to the group, Just want to let the group I now have a new e-mail. w4wwm at bellsouth.net I have revamp my home network and now ready to get back building the asterisk node (app_rpt). Will / W4WWM From w4wwm at bellsouth.net Fri Aug 24 05:26:06 2007 From: w4wwm at bellsouth.net (Will) Date: Fri, 24 Aug 2007 00:26:06 -0500 Subject: [App_rpt] looking for help to get back on Allstar Network Message-ID: <000a01c7e60f$461aae00$5e01a8c0@launchmodem.com> Hello to the group, I have asterisk up running on FC6 but not totally configured. The ARIB card shows the TX (red) LED stays on. It stay lilt even when I change out the RX cable slot to the TX cable slot. the LED stay on unless I switch it to 2W it goes off. I have 2 daughter board and configured for repeater use with the switch turned to 4W and running duplex = 0. I have wired and rewired the cable with new ends according to the pin outs, but still the same result with the RED LED on. The green LED activates when a signal is received. When I send a DTMF tone the green LED goes out. I hope this helps on understanding my problem, if not please e-mail me with any questions Thanks. Will / W4WW -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Fri Aug 24 13:03:20 2007 From: telesistant at hotmail.com (Jim Duuuude) Date: Fri, 24 Aug 2007 06:03:20 -0700 Subject: [App_rpt] looking for help to get back on Allstar Network In-Reply-To: <000a01c7e60f$461aae00$5e01a8c0@launchmodem.com> Message-ID: The TX port (FXS module) should be set to GROUNDSTART. >From: "Will" >Reply-To: Asterisk Repeater Controler >To: >Subject: [App_rpt] looking for help to get back on Allstar Network >Date: Fri, 24 Aug 2007 00:26:06 -0500 >MIME-Version: 1.0 >X-Originating-IP: [74.237.185.207] >Received: from 75-146-102-69-Illinnois.hfc.comcastbusiness.net >([75.146.102.69]) by bay0-mc5-f5.bay0.hotmail.com with Microsoft >SMTPSVC(6.0.3790.2668); Thu, 23 Aug 2007 22:54:39 -0700 >Received: (qmail 13257 invoked by uid 1484); 24 Aug 2007 05:41:47 -0000 >Received: from 127.0.0.1 by marauder (envelope-from >, uid 71) with qmail-scanner-2.01 >(clamdscan: 0.84/2481. Clear:RC:1(127.0.0.1):. Processed in 0.169135 >secs); 24 Aug 2007 05:41:47 -0000 >Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1) by 0 with SMTP; 24 >Aug 2007 05:41:47 -0000 >Received: (qmail 13144 invoked by uid 1484); 24 Aug 2007 05:41:42 -0000 >Received: from 207.115.11.52 by marauder (envelope-from >,uid 71) with qmail-scanner-2.01 (clamdscan: >0.84/2481. Clear:RC:0(207.115.11.52):. Processed in 0.130626 secs); 24 Aug >2007 05:41:42 -0000 >Received: from fmailhost02.isp.att.net (207.115.11.52)by 0 with SMTP; 24 >Aug 2007 05:41:42 -0000 >Received: from >hamradio(adsl-074-237-185-207.sip.hsv.bellsouth.net[74.237.185.207])by >bellsouth.net (frfwmhc02) with SMTPid <20070824052604H0200er3qke>; Fri, 24 >Aug 2007 05:26:05 +0000 >X-Message-Delivery: Vj0zLjQuMDt1cz0wO2k9MDtsPTA7YT0w >X-Message-Info: >6sSXyD95QpUs5z2b8gn7Z7qN1i/pd1Ksw4cVnAHhtUfweMF5B3gFHqybqbR8TgVTvQmnP+YdCQWuROLeK0HS7g== >Return-Path: >Delivered-To: mailman-app_rpt at lists.illiana.net >X-MSMail-Priority: Normal >X-Mailer: Microsoft Outlook Express 5.50.4133.2400 >X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 >X-BeenThere: app_rpt at lists.illiana.net >X-Mailman-Version: 2.1.6 >Precedence: list >List-Id: Asterisk Repeater Controler >List-Unsubscribe: >, >List-Archive: >List-Post: >List-Help: >List-Subscribe: >, >Errors-To: app_rpt-bounces at lists.illiana.net >X-OriginalArrivalTime: 24 Aug 2007 05:54:39.0645 (UTC) >FILETIME=[426B64D0:01C7E613] > >Hello to the group, > >I have asterisk up running on FC6 but not totally configured. The ARIB card >shows the TX (red) LED stays on. It stay lilt even when I change out the RX >cable slot to the TX cable slot. the LED stay on unless I switch it to 2W >it goes off. I have 2 daughter board and configured for repeater use with >the switch turned to 4W and running duplex = 0. > >I have wired and rewired the cable with new ends according to the pin outs, >but still the same result with the RED LED on. The green LED activates when >a signal is received. When I send a DTMF tone the green LED goes out. I >hope this helps on understanding my problem, if not please e-mail me with >any questions Thanks. > >Will / W4WW >_______________________________________________ >App_rpt mailing list >App_rpt at lists.illiana.net >http://lists.illiana.net/mailman/listinfo/app_rpt From w4wwm at bellsouth.net Sun Aug 26 05:02:54 2007 From: w4wwm at bellsouth.net (Will) Date: Sun, 26 Aug 2007 00:02:54 -0500 Subject: [App_rpt] App_rpt] looking for help to get back on Allstar Network Message-ID: <003701c7e79e$5cd28ce0$5e01a8c0@launchmodem.com> Jim, I look in zaptel.conf and fxogs=1 # TX pair I changed this to fxogs=2 # TX pair I then look in zapata.conf under Repeater TX Channel = 1 I changed it to Channel = 2 Went back to zaptel.conf and fxols=2 # RX pair. I changed this to fxols=1 then went back to zapata.conf under Repeater RX Channel = 2 I changed it to channel = 1 And rebooted the machince, called asterisk back up and the red LED went out. I hope this is right but if not please tell me. Anyway, it's been on for quite some time. Now the next problem is getting the audio up and going. There is still no dtmf detection. please advise. Thanks Will / W4WW -------------- next part -------------- An HTML attachment was scrubbed... URL: