From dpowellwilliams at shaw.ca  Thu Dec  6 02:12:16 2007
From: dpowellwilliams at shaw.ca (David Powell-Williams)
Date: Wed, 05 Dec 2007 18:12:16 -0800
Subject: [App_rpt] EVB 0.011
Message-ID: <0JSL00GYTVGGF310@l-daemon>

Greetings to All:

It is traditional for newbies to ask for help in their first posting, so I
will keep the faith.

I have been running Asterisk for some time but switched today to EVB 011 so
as to add app-rpt.  Asterisk runs fine until I complete the installation by
running the latest version of evbphase2.  Thereafter, Asterisk immediately
exits with code 1.  (The USB selection was made to evbphase2.)

The most serious warnings are: 
1. Error loading module 'format_au.so':
/usr/lib/asterisk/modules/format_au.so: cannot open shared object file: No
such file or directory
I confirmed that this module does not exist anywhere on my system.

2. res_musiconhold.c:804 moh_scan_files: Cannot open dir
/var/lib/asterisk/mohmp3/ or dir does not exist
The directory '/var/lib/asterisk/moh/ exists but not mohmp3. I thought mp3
files and players were deprecated on >= Asterisk 1.4 in favor of .wav

3. chan_usbradio.c:2988 store_config: File usbradio_tune_usb.conf not found,
using default parameters

4. chan_usbradio.c:3001 store_config: Unable to assign USB device for
channel usb

5. chan_usbradio.c:1034 find_desc: could not find <usb>

6. chan_usbradio.c:3309 load_module: Device usb not found

Anybody have some pointers on correcting the above?  Assistance would be
greatly appreciated.

73,

Dave
VE7MQ.



From steve.w9sh at gmail.com  Thu Dec  6 03:29:42 2007
From: steve.w9sh at gmail.com (Steven Henke)
Date: Wed, 5 Dec 2007 22:29:42 -0500
Subject: [App_rpt] EVB 0.011
Message-ID: <e2ed85230712051929m642c8bc3p4d0fe636bcd17547@mail.gmail.com>

David,

I put up new version of evbphase2 today that (at least here) works with both
EVB-0.010 and EVB-0.011.

Do a wget from http://xelatec.com/asterisk/evbphase2 and start from scratch
per the directions.

Let me known if it still gives you problems.

73,

Steven Henke, W9SH
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20071205/fac3c551/attachment.html>

From dpowellwilliams at shaw.ca  Thu Dec  6 05:45:03 2007
From: dpowellwilliams at shaw.ca (David Powell-Williams)
Date: Wed, 05 Dec 2007 21:45:03 -0800
Subject: [App_rpt] EVB 0.011
Message-ID: <0JSM00LXK5B3N010@l-daemon>

Steve:

First, thank you for your quick reply.

I did another install from scratch using your link to get the bash script
evbphase2. I believe this was the same version that I had used initially.

However, I received many more Errors, Warnings and Notices than before,
including all the ones from my first attempt.

I have tried this installation on two computers but with exactly the same
results: Everything is fine and Asterisk runs until I execute evbphase2.
After it finishes, Asterisk starts but immediately exits with error return
1.

A number of the Warnings are really puzzling, such as looking for the sound
module 'format_au.so' which clearly does not exist on disk. Is it possible
that you had some residual files on your system when you tested evbphase2?

I can send you the final lines from /var/log/asterisk/full or the death
messages from Asterisk if you would like to see them.

Do you see any advantage in trying EVB 010?

Looks like I may have to return to compiling everything from source onto
Debian :)

I would certainly appreciate any further thoughts.

73,

David
VE7MQ.



From w9drr at live.com  Fri Dec 28 00:49:26 2007
From: w9drr at live.com (Don Russell)
Date: Thu, 27 Dec 2007 18:49:26 -0600
Subject: [App_rpt] Hello
Message-ID: <BAY117-W143B9DE60F67D35C9A1CCF89550@phx.gbl>

New to the list and wanted to say hello.

Working on building a node with the usb fob. 

Located in Rockford, IL.

73's
Don


_________________________________________________________________
Get the power of Windows + Web with the new Windows Live.
http://www.windowslive.com?ocid=TXT_TAGHM_Wave2_powerofwindows_122007
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20071227/100c1b91/attachment.html>

From hwstar at rodgers.sdcoxmail.com  Sat Dec 29 02:25:31 2007
From: hwstar at rodgers.sdcoxmail.com (Stephen Rodgers)
Date: Fri, 28 Dec 2007 18:25:31 -0800
Subject: [App_rpt] Hello
In-Reply-To: <BAY117-W143B9DE60F67D35C9A1CCF89550@phx.gbl>
References: <BAY117-W143B9DE60F67D35C9A1CCF89550@phx.gbl>
Message-ID: <4775B01B.1000401@rodgers.sdcoxmail.com>

Don,

Let us know when you will be needing a node number on Allstar link. Will
this be a repeater or simplex node?

Steve WA6ZFT


Don Russell wrote:
> New to the list and wanted to say hello.
> 
> Working on building a node with the usb fob. 
> 
> Located in Rockford, IL.
> 
> 73's
> Don
> 
> 
> _________________________________________________________________
> Get the power of Windows + Web with the new Windows Live.
> http://www.windowslive.com?ocid=TXT_TAGHM_Wave2_powerofwindows_122007
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt



From w4wwm at bellsouth.net  Sat Dec 29 04:13:52 2007
From: w4wwm at bellsouth.net (Will)
Date: Fri, 28 Dec 2007 22:13:52 -0600
Subject: [App_rpt] Node 2047 up,
	running usb sound fob and a question on the node operation
Message-ID: <4775C980.9040504@bellsouth.net>

Steve, and the group,

I now have node 2047 up. This is a Radius M10 2m link radio. 

Question:

Once I connect node 2047 to the Repeater node, 2059, I get the echo 
sound and some time lose control over voice and dtmf signals.  Both 
nodes run off the same computer. 933Mhz 512mb of memory.  Any thoughts 
will be appreciated.

Oh and running both by the usb sound fob.

Will / W4WWM


From w9drr at live.com  Sat Dec 29 06:18:54 2007
From: w9drr at live.com (Don Russell)
Date: Sat, 29 Dec 2007 00:18:54 -0600
Subject: [App_rpt] Hello
In-Reply-To: <4775B01B.1000401@rodgers.sdcoxmail.com>
References: <BAY117-W143B9DE60F67D35C9A1CCF89550@phx.gbl>
	<4775B01B.1000401@rodgers.sdcoxmail.com>
Message-ID: <BAY117-W2488028F52DC806CD19A8089560@phx.gbl>

If everything goes as planned, there will be 3 repeaters, each separate nodes.
One will also have a G707 as a remote base. I just happened to have a  G707
in my mobile. I see the cool stuff you are doing with it, so I have to try it out.

Don
W9DRR 



> Date: Fri, 28 Dec 2007 18:25:31 -0800
> From: hwstar at rodgers.sdcoxmail.com
> To: app_rpt at lists.illiana.net
> Subject: Re: [App_rpt] Hello
> 
> Don,
> 
> Let us know when you will be needing a node number on Allstar link. Will
> this be a repeater or simplex node?
> 
> Steve WA6ZFT
> 
> 
> Don Russell wrote:
> > New to the list and wanted to say hello.
> > 
> > Working on building a node with the usb fob. 
> > 
> > Located in Rockford, IL.
> > 
> > 73's
> > Don
> > 
> > 
> > _________________________________________________________________
> > Get the power of Windows + Web with the new Windows Live.
> > http://www.windowslive.com?ocid=TXT_TAGHM_Wave2_powerofwindows_122007
> > 
> > 
> > ------------------------------------------------------------------------
> > 
> > _______________________________________________
> > App_rpt mailing list
> > App_rpt at lists.illiana.net
> > http://lists.illiana.net/mailman/listinfo/app_rpt
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt

_________________________________________________________________
Get the power of Windows + Web with the new Windows Live.
http://www.windowslive.com?ocid=TXT_TAGHM_Wave2_powerofwindows_122007
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20071229/49d8e713/attachment.html>

From w9drr at live.com  Sun Dec 30 17:28:51 2007
From: w9drr at live.com (Don Russell)
Date: Sun, 30 Dec 2007 11:28:51 -0600
Subject: [App_rpt] Hello
In-Reply-To: <BAY117-W2488028F52DC806CD19A8089560@phx.gbl>
References: <BAY117-W143B9DE60F67D35C9A1CCF89550@phx.gbl>
	<4775B01B.1000401@rodgers.sdcoxmail.com> 
	<BAY117-W2488028F52DC806CD19A8089560@phx.gbl>
Message-ID: <BAY117-W305D1215D3DC3FD352970889570@phx.gbl>





From: w9drr at live.com
To: app_rpt at lists.illiana.net
Date: Sat, 29 Dec 2007 00:18:54 -0600
Subject: Re: [App_rpt] Hello







If everything goes as planned, there will be 3 repeaters, each separate nodes.
One will also have a G707 as a remote base. I just happened to have a  G707
in my mobile. I see the cool stuff you are doing with it, so I have to try it out.

Don
W9DRR 



> Date: Fri, 28 Dec 2007 18:25:31 -0800
> From: hwstar at rodgers.sdcoxmail.com
> To: app_rpt at lists.illiana.net
> Subject: Re: [App_rpt] Hello
> 
> Don,
> 
> Let us know when you will be needing a node number on Allstar link. Will
> this be a repeater or simplex node?
> 
> Steve WA6ZFT
> 
> 
> Don Russell wrote:
> > New to the list and wanted to say hello.
> > 
> > Working on building a node with the usb fob. 
> > 
> > Located in Rockford, IL.
> > 
> > 73's
> > Don
> > 
> > 
> > _________________________________________________________________
> > Get the power of Windows + Web with the new Windows Live.
> > http://www.windowslive.com?ocid=TXT_TAGHM_Wave2_powerofwindows_122007
> > 
> > 
> > ------------------------------------------------------------------------
> > 
> > _______________________________________________
> > App_rpt mailing list
> > App_rpt at lists.illiana.net
> > http://lists.illiana.net/mailman/listinfo/app_rpt
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt

Get the power of Windows + Web with the new Windows Live. Get it now!

_________________________________________________________________
Share life as it happens with the new Windows Live.
http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_122007
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20071230/0d25ddd4/attachment.html>