[App_rpt] Small Problem with Wiring the connector for USB FOB!!

[Stephen Rodgers]

Roger,

The schematic is correct. I will fix and upload a new version of the
document.

Steve.



Roger F. Jordan wrote:
> Hi everyone...  I am in the process of setting up the CM-108 Sound FOB and
> found a discrepancy between the directions and the schematic!
> 
> The directions say to connect the twisted connection of the 68K resister and
> the 470K resister to the connectors Pin 3 and the open end of the 470K to
> the white wire...   However the schematic shows the 470k going to pin 3 and
> the 68K going to Pin 5 (ground) and the connection of both the resisters
> going to the white wire..

> 
> Before I get this thing together and find it does not work... Can someone
> tell me which is correct?
> 
> I have the hard stuff done... IE getting that dadgum resister connected to
> the CM108 chip!! Heheh
> 
> Thanks in advance!
> Roger W4RFJ
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>