[App_rpt] This might help you help me figure out what is goin' on...

[Stephen Rodgers]

Roger,

Glad to see you are on the way to getting it working.

Thanks for the update on radio tune. I was unaware this returned any
information at all.

Steve.


Roger F. Jordan Sr. wrote:
> Hi Steve,
> 
> Thanks for the quick reply!  Steve W9SH has been on the phone with me and
> has pretty much put me on the right track!  We (actually He) has determined
> that One of my radios is not configured correctly (I am in the process of
> fixing!  And also we have pretty much gone thru all the files to ensure that
> I did not mess anything else up!
> 
> The "radio tune" command does give you information...  according to the
> docs...  it will tell you what usb device is active and info about that
> device!
> 
> I appreciate the reply!
> 
> Roger W4RFJ
> 
> -----Original Message-----
> From: app_rpt-bounces at lists.illiana.net
> [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Stephen Rodgers
> Sent: Friday, February 15, 2008 9:08 PM
> To: Asterisk Repeater Controler
> Subject: Re: [App_rpt] This might help you help me figure out what is goin'
> on...
> 
> First off, The EEPROM notices can be safely ignored. With a modified USB
> fob, there is no EEPROM facility. All level settings are stored in a file.
> 
> The correct command is "radio tune rxnoise". There is no "radio tune"
> command.
> 
> You should have an AC noise waveform at the tap on the voltage divider
> during the "radio tune rxnoise" test Preferably, you should check it
> with a scope and see what the level is. Levels less than 50 millivolts
> peak to peak at the tap could be your problem.
> 
> 
> 
> Roger F. Jordan Sr. wrote:
>> Hi everyone.
>>
>>  
>>
>> I am getting an error in the cli as follows.
>>
>>  
>>
>> [Feb 15 16:41:36] NOTICE [10592]: chan_usbradio.c:1079 hidthread
>> UNSUCCESSFUL: EEPROM checksum BAD OR No EEPROM installed on channel usb
>>
>> [Feb 15 16:41:36] NOTICE [10593]: chan_usbradio.c:1079 hidthread
>> UNSUCCESSFUL: EEPROM checksum BAD OR No EEPROM installed on channel usb1
>>
>>  
>>
>> Still unable to get anything to adjust with the radio tune command.
>>
>>  
>>
>> Does the above line look familiar to anyone
>>
>>  
>>
>> Best Regards,
>>
>> Roger W4RFJ
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> App_rpt mailing list
>> App_rpt at lists.illiana.net
>> http://lists.illiana.net/mailman/listinfo/app_rpt
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>