[App_rpt] Workin out the bugs...

[Stephen Rodgers]

1. Have you tried inserting the ringing app in extensions.conf for the
SIP extension? The SIP extension may not be indicating ringing to the
channel used by app_rpt for the autopatch.

2. There is not be enough information here to suggest a solution. Are
the repeater and simplex nodes on the same machine? Are they both USB
fobs? What version of app_rpt is being run on both nodes? When in
transceive, what does the CLI command rpt stats XXXX print when XXXX is
the node number of the simplex node on the machine running the simplex
node?



Roger F. Jordan Sr. wrote:
> Hi everyone.
> 
>  
> 
> I have a couple of issues I am trying to resolve.
> 
>  
> 
> 1. When I make an autopatch from the repeater to an existing SIP extension
> on the system the repeater will not emit a ring sound. Everything else in
> the Patch works great both directions except no ringing when I dial out from
> the repeater.   
> 
>  
> 
> 2. When I link from the repeater to the simplex radio (transceive) the
> repeater stays in transmit mode.  This is not a big issue. because when I
> link in (in monitor), the repeater seems to work ok.
> 
>  
> 
> Again,  I bow to the OGWO's (Oh Great Wise Ones) of the Asterisk and APP-RPT
> Kingdom! 
> 
>  
> 
> Best Regards,
> 
>  
> 
> Roger F. Jordan W4RFJ
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt