[App_rpt] The wiring of the URI to a FT857D

[Stephen Rodgers]

Nope. It's an FT-897.

Steve.



Eric Fort wrote:
> Steve,
> What radio is your hf remote????  Thouhght you were running a ft857??
> 
> Eric
> 
> On Sat, Feb 23, 2008 at 10:46 AM, Stephen Rodgers <
> hwstar at rodgers.sdcoxmail.com> wrote:
> 
>> Yes and no. For a audio and keying there will probably be no issues. For
>> control of frequency and mode, you'll need to purchase the Yeasu CT62
>> RS-232 adapter cable.
>>
>> Please also note that we have never tested app_rpt with an FT857 so we
>> can't tell you for certain that app_rpt will work with it or not.
>>
>>
>> Steve.
>>
>>
>> Will wrote:
>>> Hello to the group,
>>>
>>> I would like to wire the URI up to my Yaesu FT857D and would like to
>>> here any comments concerning the wiring diagram posted on the FT897.
>>> Could one use the wiring diagram replacing the PCI radio interface
>>> points for the URI  points?
>>>
>>> Will / W4WWM
>>> _______________________________________________
>>> App_rpt mailing list
>>> App_rpt at lists.illiana.net
>>> http://lists.illiana.net/mailman/listinfo/app_rpt
>>>
>> _______________________________________________
>> App_rpt mailing list
>> App_rpt at lists.illiana.net
>> http://lists.illiana.net/mailman/listinfo/app_rpt
>>
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt