[App_rpt] Workin out the bugs...

[Stephen Rodgers]

Thanks Roger.

By the way, the problem isn't limited only to SIP. I put some extension
logic in my radio asterisk server to dial an extension on my phone
asterisk server from the radio asterisk server via IAX, and I get no
ringing sound either. This is either an Asterisk bug or an App_rpt bug,
This is something which has been broken as it used to work. I will have
to discuss this with Jim Dixon.


Steve WA6ZFT


Roger F. Jordan Sr. wrote:
> Hi Steve,
> 
> I figured out the Constant Key issue (#2).  I am still working on the
> ringing issue when dialing out...  When I dial out... using a SIP trunk to
> lets say FWD. I do not get a ringing on the repeaters output...  I am not
> sure how I would add ringing... However I will do some more research in my
> Asterisk Manual.
> 
> The problem with the constant key was that the USB's Radio Tune RXSQUELCH on
> the simplex radio was not properly adjusted...  once I did the appropriate
> adjustments... the repeater now only keys when the simplex radio is
> receiving (while they are linked). To give you a little bit of background, I
> have an Intel MINI-ITX system I built from scratch...  I have installed
> internally 2 USB FOBs. One is connected to a crossband repeater (rx 2mtrs,
> tx 440) and the other fob is connected to a simplex radio. I am using the
> easyvoxbox install that Steve w9sh shared with the group...  and except for
> mostly my messups... the app-rpt realm has been a lot of fun!
> 
> I had better dig into my book... thanks for the quick reply!
> 
> VR,
> Roger W4RFJ
> 
> -----Original Message-----
> From: app_rpt-bounces at lists.illiana.net
> [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Stephen Rodgers
> Sent: Saturday, February 23, 2008 1:56 PM
> To: Asterisk Repeater Controler
> Subject: Re: [App_rpt] Workin out the bugs...
> 
> 1. Have you tried inserting the ringing app in extensions.conf for the
> SIP extension? The SIP extension may not be indicating ringing to the
> channel used by app_rpt for the autopatch.
> 
> 2. There is not be enough information here to suggest a solution. Are
> the repeater and simplex nodes on the same machine? Are they both USB
> fobs? What version of app_rpt is being run on both nodes? When in
> transceive, what does the CLI command rpt stats XXXX print when XXXX is
> the node number of the simplex node on the machine running the simplex
> node?
> 
> 
> 
> Roger F. Jordan Sr. wrote:
>> Hi everyone.
>>
>>  
>>
>> I have a couple of issues I am trying to resolve.
>>
>>  
>>
>> 1. When I make an autopatch from the repeater to an existing SIP extension
>> on the system the repeater will not emit a ring sound. Everything else in
>> the Patch works great both directions except no ringing when I dial out
> from
>> the repeater.   
>>
>>  
>>
>> 2. When I link from the repeater to the simplex radio (transceive) the
>> repeater stays in transmit mode.  This is not a big issue. because when I
>> link in (in monitor), the repeater seems to work ok.
>>
>>  
>>
>> Again,  I bow to the OGWO's (Oh Great Wise Ones) of the Asterisk and
> APP-RPT
>> Kingdom! 
>>
>>  
>>
>> Best Regards,
>>
>>  
>>
>> Roger F. Jordan W4RFJ
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> App_rpt mailing list
>> App_rpt at lists.illiana.net
>> http://lists.illiana.net/mailman/listinfo/app_rpt
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>