[App_rpt] New ACID version uploaded to dl.allstarlink.org

[Stephen Rodgers]

James,

A new ISO is not necessary, but all the scripts have drastically
changed! astupd.sh depends on astinstall.sh in /etc/rc.d, and phase2.sh
now calls astinstall.sh which is a common asterisk install script. There
is a change to phase1.sh to remember where the download repository is
located (acidrepo file), and everything keys off of this. So unless you
want to figure out all the details of how the scripts work, your better
off doing a fresh install! Just save all your conf files first so that
you can re-install them over the default files after you run setup.sh
and enable ssh access.

Steve.


James Nessen wrote:
> So, should we download a new iso, or is there any way current nodes can get the new astupd.sh script?
> 
> -----Original Message-----
> From: app_rpt-bounces at lists.illiana.net [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Stephen Rodgers
> Sent: Sunday, October 05, 2008 1:31 PM
> To: Asterisk Repeater Controler
> Subject: [App_rpt] New ACID version uploaded to dl.allstarlink.org
> 
> A new ACID version has been uploaded:
> 
> 1. App_rpt version 0.151 supports chan_echolink and local messages
> 2. Screen program added
> 3. chan_echolink channel driver
> 4. Asterisk update script astupd.sh
> 
> The current install iso has not been affected, but if you are in the
> middle of an install, it might be a good idea to start over as the
> scripts have changed.
> 
> 
> Steve
> WA6ZFT
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>