[App_rpt] ACID update procedure to install latest version ofAsterisk

[nessenj at jimsoffice.org]

I don't know if I asked.this or.not, but what will this upgrade procedures do to us that are also running chan_irlp?

Jim / K6JWN

------Original Message------
From: Stephen Rodgers
Sender: app_rpt-bounces at lists.illiana.net
To: Asterisk Repeater Controler
ReplyTo: Asterisk Repeater Controler
Subject: [App_rpt] ACID update procedure to install latest version ofAsterisk
Sent: Oct 11, 2008 8:56 PM

A later version of asterisk is available for ACID installs.

These upgrade instructions must be followed to the letter.


1. Change directories to /root

2. If you don't have an astupd.sh file STOP. Your ACID install is too
old and you will need to do a fresh install which will install the
latest version automatically. If you have to re-install, make a backup
of your config files in  /etc/asterisk so that you can restore them to
the new install.

3. If you have an astupd.sh file, you will need to update it by
downloading a new version. Use the following wget command from the /root
directory to do this:

wget http://dl.allstarlink.org/installcd/astupd.sh

4. Once the new script is downloaded, type:

../astupd.sh

5. Your system will now be updated. Wait for the download and compile to
complete.

6. Reboot your system and check to see that your node is functioning
properly.

Steve
WA6ZFT

_______________________________________________
App_rpt mailing list
App_rpt at lists.illiana.net
http://lists.illiana.net/mailman/listinfo/app_rpt


Sent from my Verizon Wireless BlackBerry