[App_rpt-users] Asterisk and Echolink no direct connected radio

[James Nessen]

my untrained asterisk eye leads me to believe that your issue lies here:

[radio-secure]
exten => 2345,1,Answer
exten => 2345,n,Playback(tt-weasels,skip)
exten => 2345,n,Hangup

This tells me to answer, playback a sound and then hang up the connection,
and your log confirms this:

 *CLI> [Aug 14 11:45:36] NOTICE[16779]: chan_echolink.c:2189 do_new_call:
new CALL=W0IOU,ip=204.13.148.184,name=        Todd
    -- Executing [2345 at radio-secure:1] Answer("echolink/el0-12", "") in new
stack
    -- Executing [2345 at radio-secure:2] Playback("echolink/el0-12",
"tt-weasels|skip") in new stack
    -- <echolink/el0-12> Playing 'tt-weasels' (language '')
    -- Executing [2345 at radio-secure:3] Hangup("echolink/el0-12", "") in new
stack
  == Spawn extension (radio-secure, 2345, 3) exited non-zero on
'echolink/el0-12'

I am running things the old way, but the ACID manual should cover you here
as well:

[el0]
confmode=no
call=WU7Q-R
pwd=password
name=WU7Q-Repeater
qth=Sacramento-CA
email=email-addr
maxstns=20
rtcptimeout=10
node=3590
recfile=/tmp/recorded.gsm
astnode=2194
context=echolink-in
server1=server1.echolink.org
server2=server2.echolink.org
server3=server3.echolink.org

extensions.conf

[echolink-in]

;exten => ${ECHOLINK}/3001083,1,hangup
;exten => ${ECHOLINK}/3021507,1,hangup
;exten => ${ECHOLINK}/3111234,1,hangup
;exten => ${ECHOLINK}/3208345,1,hangup
exten => ${ECHOLINK}/3066432,1,Rpt,${NODE}
exten => ${ECHOLINK}/3009875,1,Rpt,${NODE}
exten => ${ECHOLINK}/3083598,1,Rpt,${NODE}
exten => ${ECHOLINK}/3127901,1,Rpt,${NODE}
exten => ${ECHOLINK}/3009865,1,Rpt,${NODE}
exten => ${ECHOLINK}/3214691,1,Rpt,${NODE}
exten => ${ECHOLINK}/3302333,1,Rpt,${NODE}
exten => ${ECHOLINK}/3005539,1,Rpt,${NODE}
exten => ${ECHOLINK}/_3XXXXXX,1,hangup

This was the old way to do access control on echolink nodes, this particular
setup only allows connections from known users and then disconnects everyone
else.  Again, not the preferred method (see the ACID manual), but it works
for us.

Jim, K6JWN

On Fri, Aug 14, 2009 at 11:47 AM, Todd Birkenholtz <birkey at gmail.com> wrote:

> Thanks Jim I will change my rpt.conf to rxchannel = Zap/pseudo
>
> Any Idea on why no audio in my inbound Echolink connections?
>
> My echolink inbound connection looks like this.
>
> In extensions.conf
>
> [radio-secure]
> exten => 2345,1,Answer
> exten => 2345,n,Playback(tt-weasels,skip)
> exten => 2345,n,Hangup
>
>  *CLI> [Aug 14 11:45:36] NOTICE[16779]: chan_echolink.c:2189 do_new_call:
> new CALL=W0IOU,ip=204.13.148.184,name=        Todd
>     -- Executing [2345 at radio-secure:1] Answer("echolink/el0-12", "") in
> new stack
>     -- Executing [2345 at radio-secure:2] Playback("echolink/el0-12",
> "tt-weasels|skip") in new stack
>     -- <echolink/el0-12> Playing 'tt-weasels' (language '')
>     -- Executing [2345 at radio-secure:3] Hangup("echolink/el0-12", "") in
> new stack
>   == Spawn extension (radio-secure, 2345, 3) exited non-zero on
> 'echolink/el0-12'
>
>
> Thanks
>
>
>
> On Fri, Aug 14, 2009 at 12:58 PM, Steve Zingman <szingman at msgstor.com>wrote:
>
>>  Todd Birkenholtz wrote:
>> > Fellow Hams and PBX tinkerer's
>> >
>> > I want to provide a auto-patch and a repeater dial-in for our club
>> > repeater using my existing home Asterisk PBX in a Flash setup.
>> > Our club repeater is connected to Echolink so I was thinking about
>> > creating a Echolink node on my server that users could link to then I
>> > would allow an outbound call.
>> > On the reverse I would like to provide a repeater dial-in number that
>> > would route through my Asterisk server to our club's node via
>> > Echolink. Keeping in mind at no time does my Asterisk server actually
>> > communicates with a radio directly it is just acting as a Echolink
>> > gateway.
>> >
>> > I have been experimenting with ACID but it appears the radio/usb
>> > driver is preventing Asterisk from loading without a actual usb radio
>> > connected. If I noload=chan_usbradio in the modules.conf file then
>> > Asterisk appears to load but I am still having problems with refrence
>> > to it in my rpt.config file.
>> >
>> > I have been able to configure a Echolink connection but I
>> > cant send audio to the connected node when the remote station connects
>> > but the Asterisk debug indicates it is.
>> > Does anybody have a working Echolink node that they would like to
>> > share their iax,echolink,rpt and extensions config file with me.
>> >
>> >
>> Todd,
>> Set rxchannel = Zap/pseudo in place chan_usb in rpt.conf You will not
>> need the hardware.
>>
>>
>> 73, Steve N4IRS
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
>


-- 
Jim Nessen K6JWN
Email: nessenj at jimsoffice.org | Ph: 530.564.0039
IRLP: Node 3598 | Echolink: 83598 K6JWN-R | AllStar: Node  2165
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20090814/09cf05e1/attachment.html>