[App_rpt-users] Registration Refused

[Jon Rorke]

If you are doing a 2 node system, then you also need to set up the 
rpt.conf file to report both nodes separately.

Your IAX file is most likely ok.

In you rpt conf file you need to have the reporting lines in each node 
stanza.

eg:

[first node]
(node 1 config stuff)

Add the stat post lines as per normal:

statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null   
; get Allstar updates for node look up
statpost_url=http://stats.allstarlink.org/uhandler.php    ; Report  this 
node  to Allstar stats page


And at the end of the second node just add this line:

[second node]
(node 2 config stuff)

statpost_url=http://stats.allstarlink.org/uhandler.php  ; Report this 
node to Allstar stats page

Note that the line for getting node updates must not be here. Only the 
line that reports to the Allstar server.


Hope this helps.

Jon VA3RQ


Tim Sawyer wrote:
> I'm setting up a second node for the first time and it won't register.
>
> /etc/asterisk/iax.conf:
> [general]
> register=A2528:0xxxxx at register.allstarlink.org
> register=A2529:0xxxxx at register.allstarlink.org
>
>
> /var/log/astersik/messages:
> [Aug 25 05:41:57] NOTICE[16131] chan_iax2.c: Registration of 'A2529'  
> rejected: 'Registration Refused' from: 'xxx.xxx.xxx.xxx'
> [Aug 25 05:42:47] NOTICE[16129] chan_iax2.c: Registration of 'A2529'  
> rejected: 'Registration Refused' from: 'xxx.xxx.xxx.xxx'
> [Aug 25 05:43:37] NOTICE[16128] chan_iax2.c: Registration of 'A2529'  
> rejected: 'Registration Refused' from: 'xxx.xxx.xxx.xxx'
>
>
> I've confirmed the new password and tripple check my conf files. The  
> new node is otherwise working. Any ideas?
>
> Thanks,
> --
> Tim, WD6AWP
> :wq
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
>