[App_rpt-users] Rx audio delay, rx squelch hysteresis

[Jamison Judge]

Hey Guys,

I was wondering if there was a way to set hysteresis for the rx squelch setting while tuning the audio levels for usbradio. We've found that when adjusting the carrier squelch level there isn't one value that both passes accaptable signals and blocks noise without serious chopping.

Also, does the software implement any kind of an audio delay with the COR detection to eliminate squelch tails on the receive side? If so, is the delay adjustable?

Thanks a lot,
Jamison
KI6VCE
Sent from my Verizon Wireless BlackBerry