[App_rpt-users] TM-271 remote base setup
Scott Weis
kb2ear at kb2ear.net
Wed Sep 23 16:46:42 UTC 2009
I have now tried this on 3 different machines, every one of them fails the
same way. Does anyone actually have a Kenwood TM-271a working with version
0.203 9/12/2009 of app_rpt.c?
Scott
----- Original Message -----
From: "Scott Weis" <kb2ear at kb2ear.net>
To: <sales at qrvc.com>; "Jim Duuuude" <telesistant at hotmail.com>
Cc: "app_rpt mailing list" <app_rpt-users at qrvc.com>
Sent: Tuesday, September 22, 2009 11:28 PM
Subject: Re: [App_rpt-users] TM-271 remote base setup
> Anyway, Does anyone out there have a working config for the tm271 that
> they
> would be willing to share? I can provide SSH access for debugging. at this
> point I'm stuck.
>
> Thanks & 73
> Scott KB2EAR
> ----- Original Message -----
> From: "Stephen Rodgers" <sales at qrvc.com>
> To: "Jim Duuuude" <telesistant at hotmail.com>
> Cc: <kb2ear at kb2ear.net>; "app_rpt mailing list" <app_rpt-users at qrvc.com>
> Sent: Tuesday, September 22, 2009 11:07 PM
> Subject: Re: [App_rpt-users] TM-271 remote base setup
>
>
>> Jim Duuuude wrote:
>>> No, in the case of the tm-271 the interface IS the standard serial one
>>> that connects thru the mic cable.
>>>
>>>> Date: Tue, 22 Sep 2009 18:50:41 -0700
>>>> From: sales at qrvc.com
>>>> To: kb2ear at kb2ear.net
>>>> CC: app_rpt-users at qrvc.com
>>>> Subject: Re: [App_rpt-users] TM-271 remote base setup
>>>>
>>>> Scott Weis wrote:
>>>>> I have just tried with a belkin USB serial dongle and get the exact
>>>>> same
>>>>> errors. I can see data going out on the TX light but no rx light ever
>>>>> flashes. It's like the radio is not talking to the system. As a test
>>>>> I
>>>>> tried the Kenwood RCP software with the same USB dongle and it works
>>>>> file.
>>>>>
>>>>> Am I supposed to set the baud rate somewhere?
>>>>>
>>>>> Thanks & 73,
>>>>> Scott KB2EAR
>>>>> ----- Original Message -----
>>>>> From: "Scott Weis" <kb2ear at kb2ear.net>
>>>>> To: "app_rpt users list" <app_rpt-users at qrvc.com>
>>>>> Sent: Tuesday, September 22, 2009 5:01 PM
>>>>> Subject: [App_rpt-users] (no subject)
>>>>>
>>>>>
>>>>>> I am haveing trouble setting up a remote base using a TM-271A. I have
>>>>>> the
>>>>>> folloing settings in my rpt.conf
>>>>>>
>>>>>> [2555] ; Node id of Remote Base
>>>>>> rxchannel = Radio/usb1 ; Rx audio/signalling channel
>>>>>> functions = functions-remote
>>>>>> phone_functions=functions-remote
>>>>>> remote=tm271
>>>>>> ioport = /dev/ttyS0 ; Specify port for serial
>>>>>> port
>>>>>> (optional)
>>>>>> memory = memory ; Section to hold memory
>>>>>> entries
>>>>>> (optional)
>>>>>> authlevel = 0 ; Anyone can use it
>>>>>> duplex=0
>>>>>> statpost_program=/usr/bin/wget,-q,--output-document=/dev/null ;
>>>>>> Program
>>>>>> and
>>>>>> options to send stats
>>>>>> statpost_url=http://stats.allstarlink.org/uhandler.php ; URL for
>>>>>> status
>>>>>> updates
>>>>>>
>>>>>> When I connect I get serial errors, am I missing something?
>>>>>>
>>>>>> [Sep 22 16:54:32] NOTICE[10614]: chan_echolink.c:2102
>>>>>> do_el_directory:
>>>>>> Directory pgm done downloading(partial,compressed), 132 records
>>>>>> -- Accepting AUTHENTICATED call from 172.31.1.164:
>>>>>> > requested format = ulaw,
>>>>>> > requested prefs = (ulaw),
>>>>>> > actual format = ulaw,
>>>>>> > host prefs = (ulaw|gsm),
>>>>>> > priority = mine
>>>>>> -- Executing [2555 at radio-phone:1] Answer("IAX2/pbx-5488", "") in
>>>>>> new
>>>>>> stack
>>>>>> -- Executing [2555 at radio-phone:2] Wait("IAX2/pbx-5488", "2") in
>>>>>> new
>>>>>> stack
>>>>>> -- Executing [2555 at radio-phone:3] Rpt("IAX2/pbx-5488", "2555|P")
>>>>>> in
>>>>>> new
>>>>>> stack
>>>>>> -- Re-Loading config for repeater 2555
>>>>>> == Parsing '/etc/asterisk/rpt.conf': Found
>>>>>> -- rpt (Rx) initiating call to Radio/usb1 on Radio/usb1
>>>>>> == Set device 5-1 to usb1
>>>>>> == Parsing '/etc/asterisk/usbradio_tune_usb1.conf': Found
>>>>>> [Sep 22 16:54:36] WARNING[10860]: chan_usbradio.c:1436 hidthread:
>>>>>> Loaded
>>>>>> parameters from usbradio_tune_usb1.conf for device usb1 .
>>>>>> [Sep 22 16:54:36] NOTICE[10859]: app_rpt.c:4040 openserial: Opened
>>>>>> serial
>>>>>> port /dev/ttyS0
>>>>>> [Sep 22 16:54:36] NOTICE[10859]: app_rpt.c:8284 rpt_telemetry:
>>>>>> Tracepoint
>>>>>> rpt_telemetry() entered mode=38
>>>>>> [Sep 22 16:54:36] NOTICE[10859]: app_rpt.c:8478 rpt_telemetry:
>>>>>> Tracepoint
>>>>>> rpt_telemetry() exit
>>>>>> [Sep 22 16:54:36] NOTICE[10871]: app_rpt.c:4230 send_usb_txt:
>>>>>> send_usb_txt
>>>>>> SETFREQ 0.0 0.0 0.0 0.0 L
>>>>>> [Sep 22 16:54:36] NOTICE[10871]: app_rpt.c:11117 serial_remote_io:
>>>>>> ioport=/dev/ttyS0 baud=13 iofd=0x4b
>>>>>> [Sep 22 16:54:37] WARNING[10871]: app_rpt.c:11140 serial_remote_io:
>>>>>> Serial
>>>>>> device not responding on node 2555
>>>>>> [Sep 22 16:54:37] NOTICE[10871]: app_rpt.c:11117 serial_remote_io:
>>>>>> ioport=/dev/ttyS0 baud=13 iofd=0x4b
>>>>>> [Sep 22 16:54:38] WARNING[10871]: app_rpt.c:11140 serial_remote_io:
>>>>>> Serial
>>>>>> device not responding on node 2555
>>>>>> [Sep 22 16:54:38] NOTICE[10871]: app_rpt.c:11117 serial_remote_io:
>>>>>> ioport=/dev/ttyS0 baud=13 iofd=0x4b
>>>>>> [Sep 22 16:54:39] WARNING[10871]: app_rpt.c:11140 serial_remote_io:
>>>>>> Serial
>>>>>> device not responding on node 2555
>>>>>> [Sep 22 16:54:39] NOTICE[10871]: app_rpt.c:11117 serial_remote_io:
>>>>>> ioport=/dev/ttyS0 baud=13 iofd=0x4b
>>>>>> [Sep 22 16:54:39] NOTICE[10733]: app_rpt.c:10331 handle_link_data:
>>>>>> @@@@
>>>>>> node
>>>>>> 2298 recieved node list L
>>>>>> T2023,T2061,T2459,T2010,T2011,T2393,T2480,T2481
>>>>>> from node 2000
>>>>>> [Sep 22 16:54:40] WARNING[10871]: app_rpt.c:11140 serial_remote_io:
>>>>>> Serial
>>>>>> device not responding on node 2555
>>>>>> [Sep 22 16:54:40] NOTICE[10871]: app_rpt.c:11117 serial_remote_io:
>>>>>> ioport=/dev/ttyS0 baud=13 iofd=0x4b
>>>>>> [Sep 22 16:54:41] WARNING[10871]: app_rpt.c:11140 serial_remote_io:
>>>>>> Serial
>>>>>> device not responding on node 2555
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at qrvc.com
>>>>>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at qrvc.com
>>>>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>>>>
>>>> The baud rate is fixed in the app_rpt s/w.
>>>>
>>>> The problem is very likely to be in the interface. What are you using
>>>> for an interface? Note the interface is not the usb to serial
>>>> converter,
>>>> and it is not the pre-made up Kenwood serial cable either. It is
>>>> usually
>>>> a homebrew circuit which merges the output from the sound fob and the
>>>> serial port together, oh, and it requires power from the modified FOB
>>>> as
>>>> well.
>>>>
>>>> Please refer to the interface circuit here:
>>>>
>>>> http://images.qrvc.com/usb2tmg707.pdf
>>>>
>>>> Steve
>>>> WA6ZFT
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at qrvc.com
>>>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at qrvc.com
>>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>> Oops. I screwed up!
>> I don't know how I got stuck on TMG-707 vs TM-271.
>>
>> The TM-271 has a dedicated serial port so please disregard my confusing
>> message....
>>
>> Steve
>> WA6ZFT
>>
>>
>>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
>
More information about the App_rpt-users
mailing list