[App_rpt-users] CW ID issues

[David McGough]

Hi Stephen,

Yes about rpt stats <node>....The node num is 29--I'm still testing the
system before taking this box live. Initially, everything was working
great. Now, however, after disconnecting the node, leaving it idle for a
while, and reconnecting it, the IDer is dead again. The "Identifier state"
remains "CLEAN" no matter what happens. Also, an rpt dump 29 always shows
"myrpt->mustid = 0" ....But, the node is otherwise completely functional.

The 2m repeater node (currently node #28) on the same box still works 
properly, though--no IDer problems, etc.

I'm still poking around studying the source code--

73, David kb4fxc




On Fri, 25 Sep 2009, Stephen Rodgers wrote:

> David McGough wrote:
> > More info....the nounkeyct statement doesn't seem to effect this issue
> > after all. I added nounkeyct=1 back to the stanza and the IDer is now
> > (still) working, so far.  So, nounkeyct does work as expected and
> > something else is going on...I'll keep investigating.
> > 
> > I guess I should ask if this is the right place for this thread, or, 
> > should it be moved to mantis?
> > 
> > 73, David kb4fxc
> > 
> > 
> > On Fri, 25 Sep 2009, David McGough wrote:
> > 
> >> ...Okay, here's some additional feedback. I've been monitoring the system
> >> for the last hour and a half, and the IDer isn't working any more, at all,
> >> for this simplex node. It ID'ed properly about 3 times. This is with
> >> duplex=1 and nounkeyct removed from the config. All telemetry is still 
> >> present on the 10M simplex and it otherwise appears properly functional.
> >>
> >> Also, note that this same box is controlling a second node--a full duplex
> >> 2m repeater. Everything about the 2m side is working great--no problems
> >> with the IDer, etc. And, both of these nodes (the 2m & 10m) are linked
> >> together. This box also has chan_echolink enabled on it.
> >>
> >> Thanks for any ideas!
> >>
> >> 73, David kb4fxc
> >>
> >>
> >>
> >>
> > 
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at qrvc.com
> > http://qrvc.com/mailman/listinfo/app_rpt-users
> > 
> 
> Asterisk CLI command "rpt stats 2285" is your friend
> 
> Steve
> WA6ZFT
> 
>