[App_rpt-users] Two Nodes

[David KE6UPI]

In rpt.conf under [nodes] what do you have. It should look like this.

[nodes]
; Note, if you are using automatic update for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your local nodes, and private (off of allstar link) nodes here.


2063 = radio at 127.0.0.1:4570/2063,NONE   ; This must be changed to your node
number
2064 = radio at 127.0.0.1:4570/2064,NONE,y
2080 = radio at 127.0.0.1:4570/2080,NONE,y
2081 = radio at 127.0.0.1:4570/2081,NONE,y

** I use 4570 for my iax port. I might need 4569 for your port.

RPT checks rpt.conf first then rpt_extnodes. If you are using rpt_extnodes
then it might be routing out to your public address and your router might
not like that.

David


On Sat, Dec 18, 2010 at 7:07 PM, Bob Bunter <hammradio at charter.net> wrote:

>     What's the secret as to getting Two Different Nodes on the same Box to
> connect and talk to each other?
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20101218/17512260/attachment.html>