[App_rpt-users] Minimum System and Network Requirements
Jim Duuuude
telesistant at hotmail.com
Fri Dec 31 17:38:43 UTC 2010
Well, first of all the BeagleBoard-xM (which is what we use) is a 1GHz processor.
I have a feeling you were looking at the BeagleBoard C3 or C4 (the old one).
I have had good experience using 3G networks (both Sprint and Verizon)
for ROIP use. It seems to work quite well.
JIM WB6NIL
> From: tartan75 at gmail.com
> To: app_rpt-users at ohnosec.org
> Date: Fri, 31 Dec 2010 15:02:05 +0000
> Subject: [App_rpt-users] Minimum System and Network Requirements
>
> I'm looking to set up ACID on another machine. The machine will run 1 node
> (using DMK URI), which will be connected to only by iaxrpt. Its likely that
> the node will be simplex, although if a change to duplex would affect the
> answers it would be useful to know.
>
> System requirements:
> I read a while ago that the minimum system requirements were Pentium III
> 866Mhz, and 512MbRAM. I've seen references to the use of Beagle board, which
> until recently (if I understand correctly) wouldn't have been a comparable
> spec. Is the above spec a minimum, or have people found say a 600Mhz
> processor adequate for this level of installation?
>
> Network requirements:
> My use is generally temporary installs at remote locations. Broadband is
> often available, but for the locations where it isn't has anyone any
> experience of using 3G connections , or even GPRS (with an appropriate codec
> selected). I have experience of getting reliable 3G connections for 64k mp3
> shoutcast broadcast feed streams, but not for ROIP use. I appreciate that
> reliability and latency will be degraded with a mobile connections.
>
> Any experience much appreciated.
>
> Regards
>
> Nathan
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20101231/5f6c6ef9/attachment.html>
More information about the App_rpt-users
mailing list