[App_rpt-users] My instructions for keyfob modifications

[Steve Gladden]

> Hi,
>
> I have created an instructions set on how  to modify a keyfob based on the
> 119
> chip.  These are basically just a different version of the original
> instructions.  Hopefully having a second set will help in making
> modifications.
>
> The lastest draft is located at  http://m3h.com/usbfob-119.pdf.  Feel free
> to
> copy and share around.
>
> Please take a look and privide feedback.
>
> It would be nice to see these instructions linked on the main hardware
> page as
> an alternative to the original instructions.
>
>
> Mike
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>

NICE JOB!!
I especially liked your technique where you position the component to
be soldered to pin #13 first with hot glue to hold it in place before
actually soldering!
I've been doing it the hard way ;-)

I'll have to try this on my next one!







Michigan Broadband Systems Inc.
"Always Connected"

(734)527-7150

Steve's cellphone: (734)904-1811





-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.