[App_rpt-users] CLI (Command Line Interface)

[Craig Hastings]

Thanks Bob!



On 26 July 2010 12:29, Bob Brown - WØNQX <bbrown at byrg.net> wrote:

> rpt fun yournodenumber *xx
> and this list should get you going
>
> http://app-rpt.qrvc.com/node/21
>
>
> This section contains the suggested prefix digits, mandatory command codes,
> and suggested command codes for Allstar Link.
>
>
> Prefix Digit Suggestions  Prefix Functions *1 Disconnect Link *2 Monitor
> Link *3 Connect Link *4 Command Mode *5 Macros *6 User Functions *7 Connection
> Status *8 User Functions *9 User Functions *0 User Functions *A User
> Functions *B User Functions *C User Functions *D User Functions
>
>
> Mandatory Command Codes
> These are the mandatory command codes which all Allstar Link nodes must
> support to provide command code consistency to the users. Command Code Description
> *1node Disconnect Link *2node Connect link in monitor mode *3node Connect
> link in transcieve mode *4node Enter command mode on a remote node *7 Local
> connection status
>
>
> Notes
>
>
>    1. node is an Allstar Link node number
>    2. Node number zero (0) is shorthand for the last node operated on by a
>    previous command
>    3. Monitor mode means listen to a node, but do not send any audio to it
>
>    4. Command mode means send all received DTMF digits to the node number
>    specified (bypassing the local command decoder). Send # to exit command
>    mode, and restore local command decoding.
>
>
>  Optional Command Codes Command Code Description *80 Force System ID *81 Say
> System Time *82 Say app_rpt software version *85 Last active node
> (system-wide) *87 System-wide connection status *51 Disconnect all links
> (macro) *52 Site Normal (macro) *53 Reconnect all links (macro)
>
>
> --
> Thanks in Advance
>
>    Bob Brown, WØNQX
>
>    Kansas City Metro Area
>
>    http://sm0kenet.net
>
>    http://byrg.net
>
>    http://kcdstar.byrg.net
>
> Quis custodiet ipsos custodes?
>
> --
>
>
>
> On Mon, Jul 26, 2010 at 11:03, Craig Hastings <craig.hastings at gmail.com>wrote:
>
>>
>> Does anyone have a list of Command line interface stuff specifically how
>> to control the node from the command line.  I am guessing this would be from
>> the 'asterisk -r' command line.
>>
>> Say a Link is Up and I want to take it down or put up a link from the
>> command line,  I hunted around and didn't find anything on it,  sorry if its
>> posted already somewhere however I have only looked a few months back in the
>> archives.
>>
>> Thanks.
>>
>> Craig
>> VA3DTF
>> VE3WOM-L echolink & allstar
>>
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20100726/2debec72/attachment.html>