[App_rpt-users] usbradio.conf sample file for IRLP boards

[K&R Yoksh]

Hi all,

I thought I'd pass along a working usbradio.conf for anyone trying to get an IRLP board going on Asterisk. Consider this file to be a template to get started with. I haven't managed to get the AUX 1,2,3 outputs going yet, but PTT and COS seem to be working FB.

My node radios have built-in PL squelch, which I'm using at the moment. I'm also using the software DTMF decoder.

At this point, I'm using an unmodified CM108 fob and my homebrew IRLP board.

73.
Kyle
K0KN


;
; Usbradio channel driver Configuration File
;

[general]

[usb2210]

; IRLP board support
pp3 =  ptt       ; out0, out1 or ptt
; pp10 = in        ; in, cor or ctcss
; pp12 =
 in        ; pins 10,12,13,15 are for DTMF
; pp13 = in         
; pp15 = in        
pp11 = cor
; pp4 = out0      ; pins 4,5,6 are AUX 1,2,3, default off
; pp5 = out0    
; pp6 = out0    

hdwtype=0    
rxboost=1
txboost=1
rxctcssrelax=1
txctcssdefault=100.0
rxctcssfreqs=100.0
txctcssfreqs=100.0
rxctcssoverride=0
;carrierfrom=dsp
carrierfrom=ppinvert
;ctcssfrom=dsp
;ctcssfrom=pp
rxdemod=flat
txprelim=yes
txlimonly=no
txtoctype=notone
txmixa=composite
txmixb=no
invertptt=0
duplex=0
rxondelay=0
rxnoisefiltype=0
eeprom=0

#includeifexists custom/usbradio.conf

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20101031/66d63b5b/attachment.html>