[App_rpt-users] usbradio.conf sample file for IRLP boards

[Chuck Henderson]

It looks fine here.  no garbled characters.

On Sun, Oct 31, 2010 at 11:10 PM, K&R Yoksh <yokshs at sbcglobal.net> wrote:

>
> Hi all,
>
> I thought I'd pass along a working usbradio.conf for anyone trying to get
> an IRLP board going on Asterisk. Consider this file to be a template to get
> started with. I haven't managed to get the AUX 1,2,3 outputs going yet, but
> PTT and COS seem to be working FB.
>
> My node radios have built-in PL squelch, which I'm using at the moment. I'm
> also using the software DTMF decoder.
>
> At this point, I'm using an unmodified CM108 fob and my homebrew IRLP
> board.
>
> 73.
> Kyle
> K0KN
>
>
> ;
> ; Usbradio channel driver Configuration File
> ;
>
> [general]
>
> [usb2210]
>
> ; IRLP board support
> pp3 =  ptt       ; out0, out1 or ptt
> ; pp10 = in        ; in, cor or ctcss
> ; pp12 = in        ; pins 10,12,13,15 are for DTMF
> ; pp13 = in
> ; pp15 = in
> pp11 = cor
> ; pp4 = out0      ; pins 4,5,6 are AUX 1,2,3, default off
> ; pp5 = out0
> ; pp6 = out0
>
> hdwtype=0
> rxboost=1
> txboost=1
> rxctcssrelax=1
> txctcssdefault=100.0
> rxctcssfreqs=100.0
> txctcssfreqs=100.0
> rxctcssoverride=0
> ;carrierfrom=dsp
> carrierfrom=ppinvert
> ;ctcssfrom=dsp
> ;ctcssfrom=pp
> rxdemod=flat
> txprelim=yes
> txlimonly=no
> txtoctype=notone
> txmixa=composite
> txmixb=no
> invertptt=0
> duplex=0
> rxondelay=0
> rxnoisefiltype=0
> eeprom=0
>
> #includeifexists custom/usbradio.conf
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20101031/f12b513f/attachment.html>