[App_rpt-users] Squelch trigger

[Bogdan Diaconescu]

Thanks Matt, I noticed the option in sourcecode.

Regards,
Bogdan

> The feature you need is already built in to the system.
>
> Look for  "Rxondelay" in USBradio.conf
>
> This will  allow you to set the time during which the Rx COS is ignored,
> after the PTT is dropped.
>
> I have used this in the past to stop two linked repeaters ping ponging.
>
> Regards,
>
> Matt
>
> On 12 October 2010 17:42, Bogdan Diaconescu <yo3iiu at yo3iiu.ro> wrote:
>
>> Hello,
>>
>> I'm using app_rpt to build a repeater system using COR and PTT
>> signaling.
>> The issue I'm having is that after each PTT off I got a COR enable from
>> rig for a constant amount of time of 30ms which triggers another PTT on
>> and so on. Therefore I'm looking for a solution to overcome this
>> problem.
>>
>> Specifically, what I need is an option that will trigger COR to app_rpt
>> only when COR was active for an user specified period of time (say 50ms
>> in
>> my case).
>>
>> Thanks and regards,
>> Bogdan - YO3IIU
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>