[App_rpt-users] IRLP Deletion: Was 900 levels and com port ?

[Stephen Rodgers]

On 10/24/2010 10:56 AM, Stephen Rodgers wrote:
> On 10/24/2010 10:04 AM, Paul M. Nannery wrote:
>> I am putting a up a 900 meg system and would like some guidance on getting
>> the levels right I know dsp is not set up for the narrow band. Also Jim is
>> there any way to use the com port for ptt like you did with the lpt port as
>> most newer computers do not have lpt ports? 
>>
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
> 
> As root on an acid install, this should work (Note: I haven't tested this, so someone should do that and comment on it.)--
> 
> Remove the irlp cron table:
> 
> crontab -u repeater -r
> 
> Remove the irlp startup script rc.irlp from /etc/rc.d/rc.local using a text editor such as vi. This should be located
> near the bottom of the file.
> 
> Remove the repeater user and the home directory:
> 
> userdel -rf repeater
> 
> Restart the system:
> 
> reboot
> 
> 
> Steve
> WA6ZFT
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
> 

Oops, I replied to the wrong thread!

Steve
WA6ZFT