[App_rpt-users] Please help me. How do I set up PAP2Ts to connect to my repeater?
Jim Duuuude
telesistant at hotmail.com
Thu Oct 28 22:54:08 UTC 2010
in your [internal] context add (for example):
exten => 1003,1,Rpt(1234|Pv) ; (Replace '1234' with the correct node number)
JIM
> From: rpt2 at chuck.midlandsnetworking.com
> Date: Thu, 28 Oct 2010 17:38:38 -0500
> To: app_rpt-users at qrvc.com
> Subject: [App_rpt-users] Please help me. How do I set up PAP2Ts to connect to my repeater?
>
> I am just getting started and still have not got a good understanding
> of how this works. I currently have a basic install from the
> ACID_CENTOS CD that I downloaded 9/29/2010. I have the radios
> connected using a CM-108. In addition to this basic setup I want to
> use a PAP2T to be able to connect to the repeater. I have configured
> a couple of PAP2Ts to register with the server and I can dial from
> either one to the other. What I also want to be able to do is dial a
> number from either one of the PAP2Ts that will connect them to the
> repeater such that they can hear what the repeater receiver is hearing
> and that audio from the handset will come out over the air on the
> repeater. The PAP2T's are on the same LAN with the server. It seems
> like it should be easy, probably just the right line in the
> extensions.conf file, but all of my attempts at it have failed. The
> dial plan that I put in the PAP2Ts is just "(x.)" without the quotes.
>
> Would someone please tell me how to make this work?
>
> Remember I am a newbie here so don't assume that I know anything about
> the configuration of asterisk or app_rpt, I really don't know why what
> I have so far is even working at all.
> I made the Linksys adapters work by adding the following to sip.conf.
> I am not sure if this is even correct, but it allows them to call each
> other. Amazing!!
> - - - - - - - - - - - - - - - - cut here - - - - - - - - - - - - - -
> - - - - - - - - - - - - - - - - - - - -
> ; 1000 is Linksys PAP2T number 1 registered
> [1000] ; CAH added 10/28/2010 2:01am
> type=friend ; CAH added 10/28/2010 2:01am
> context=phones ; CAH added 10/28/2010 2:01am
> host=dynamic ; CAH added 10/28/2010 2:01am
>
> ; 1001 is Linksys PAP2T number 2 registered
> [1001] ; CAH added 10/28/2010 2:01am
> type=friend ; CAH added 10/28/2010 2:01am
> context=phones ; CAH added 10/28/2010 2:01am
> host=dynamic ; CAH added 10/28/2010 2:01am
>
> ; 1002 is Linksys SPA-3102 not registered
> [1002] ; CAH added 10/28/2010 3:21am
> type=friend ; CAH added 10/28/2010 3:21am
> context=phones ; CAH added 10/28/2010 3:21am
> host=10.10.10.234 ; CAH added 10/28/2010 3:21am
> port=5061 ; CAH added 10/28/2010 5:24am
> - - - - - - - - - - - - - - - - cut here - - - - - - - - - - - - - -
> - - - - - - - - - - - - - - - - - - - -
> And also adding to extensions.conf the following which I gleaned from
> an example in a book on Amazon.com, I didn't figure out what the i and
> the s are for but they were in the example and after adding these the
> phones can call each other, just not the repeater.
> - - - - - - - - - - - - - - - - cut here - - - - - - - - - - - - - -
> - - - - - - - - - - - - - - - - - - - -
> [default]
> exten => i,1,Hangup ; CAH added 10/28/2010 1:27am
> exten => s,1,Verbose(1|Unrouted call handler) ; CAH added 10/28/2010 1:27am
> exten => s,n,Answer() ; CAH added 10/28/2010 1:27am
> exten => s,n,Wait(1) ; CAH added 10/28/2010 1:27am
> exten => s,n,Playback(tt-weasels) ; CAH added 10/28/2010 1:27am
> exten => s,n,Hangup() ; CAH added 10/28/2010 1:27am
>
> [incoming_calls] ; CAH added 10/28/2010 1:27am
>
> [internal] ; CAH added 10/28/2010 1:27am
> exten => 1000,1,Verbose(1|Extension 1000) ; CAH added 10/28/2010 2:10am
> exten => 1000,n,Dial(SIP/1000,30) ; CAH added 10/28/2010 2:10am
> exten => 1000,n,Hangup() ; CAH added 10/28/2010 2:10am
> exten => 1001,1,Verbose(1|Extension 1001) ; CAH added 10/28/2010 2:10am
> exten => 1001,n,Dial(SIP/1001,30) ; CAH added 10/28/2010 2:10am
> exten => 1001,n,Hangup() ; CAH added 10/28/2010 2:10am
> exten => 1002,1,Verbose(1|Extension 1002) ; CAH added 10/28/2010 2:10am
> exten => 1002,n,Dial(SIP/1002,30) ; CAH added 10/28/2010 2:10am
> exten => 1002,n,Hangup() ; CAH added 10/28/2010 2:10am
>
> [phones] ; CAH added 10/28/2010 1:27am
> include => internal ; CAH added 10/28/2010 1:27am
>
> - - - - - - - - - - - - - - - - cut here - - - - - - - - - - - - - -
> - - - - - - - - - - - - - - - - - - - -
> I think that is all I added to the configuration of the server so far.
> What more do I need? What of this is not needed or wrong?
> Chuck
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20101028/07bf2c80/attachment.html>
More information about the App_rpt-users
mailing list