[App_rpt-users] Should be listed as?

hwstar at rodgers.sdcoxmail.com hwstar at rodgers.sdcoxmail.com
Fri Oct 29 23:02:42 UTC 2010


Simplex.

Simplex linking a node to a repeater  is a terribly bad idea! Please 
don't do this.  This puts squelch tails on all the connected systems 
when you unkey, as the repeater sends back a squelch tail to the node 
which transmits it over the network.

I don't know about the policies of other node operators, but I don't 
have much tolerance for this. I'll disconnect any node connected to my 
node which is doing this.

The right way to do this is to have anothe radio at the repeater site on 
a separate channel from the repeater output as a remote base on the 
repeater. This way there's no squelch tail.


On Fri, Oct 29, 2010 at 3:48 PM, Darril Holland wrote:

  I have my Allstar node-server hooked up to radio  tx/rcv(at my house) 
to my local repeater. In the Allstar portal should I be  configuared as 
simplex, remote base, or hub? My setup is not at repeater  site or 
physcally wired to the repeater. Tnx,  Darril/WD5GJP

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at qrvc.com 
<javascript:parent.wgMail.openComposeWindow('App_rpt-users at qrvc.com')>   
<javascript:parent.wgMail.openComposeWindow('App_rpt-users at qrvc.com')>
http://qrvc.com/mailman/listinfo/app_rpt-users 
<http://qrvc.com/mailman/listinfo/app_rpt-users>   
<http://qrvc.com/mailman/listinfo/app_rpt-users>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20101029/66c38743/attachment.html>


More information about the App_rpt-users mailing list