[App_rpt-users] morse id?

[hwstar at rodgers.sdcoxmail.com]

Hi Jim,

You are changing them at the portal level, and by editing rpt.conf, 
correct? Editing the config files on the server is not going to work
when the server has been set up to download its configuration from the 
portal.

Steve
WA6ZFT


On Fri, Sep 10, 2010 at 12:22 PM, James Nessen wrote:

> downloaded from the portal.
>
> Jim
>
> On Sep 10, 2010, at 12:20 PM, hwstar at rodgers.sdcoxmail.com wrote:
>
>> This this being downloaded from the portal or is it a register-only 
>> node?
>>
>> Steve
>> WA6ZFT
>>
>>
>>
>> On Fri, Sep 10, 2010 at 10:45 AM, James Nessen wrote:
>>
>>> I am having an issue with the morse id settings, it seems that no 
>>> matter what I change them to, they actually never change when the 
>>> node plays them
>>>
>>> example:
>>>
>>> [2142]
>>> ...
>>> morse=morse2142
>>> ...
>>>
>>> [morse2142]
>>>
>>> speed=22
>>> frequency=941
>>> amplitude=4096
>>> idfrequency=941
>>> idamplitude=2048
>>>
>>> I restarted asterisk after changing this (first doing a rpt reload 
>>> and then a full restart) and it is still playing at 800hz at 18wpm
>>>
>>> Anyone else noticing this same behavior?
>>>
>>> Jim, K6JWN
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at qrvc.com
>>> http://qrvc.com/mailman/listinfo/app_rpt-users