[App_rpt-users] One last thing...

[Corey Dean N3FE]

All fixed!  Thank you...  I guess I was over driving the fob.  I had the voice audio at 950 to get it where I needed it.  I had the tx pl to high.  Now it is to low.  Guess I will be building up an op amp so I can get things where it should be.

Thanks for the fast response!  That could care of everything!

---------------------------------------------------------------------
Corey N3FE



-----Original Message-----
From: Ken [mailto:ke2n at cs.com]
Sent: Sat 9/18/2010 10:29 PM
To: Corey Dean   N3FE; app_rpt-users at qrvc.com
Subject: RE: [App_rpt-users] One last thing...
 
You should be using one of the USB options that limits the audio output
level (txprelim=yes or txlimonly=yes)

And

If you are running composite audio, you need to  make sure that the txtone
and txvoice settings together do not total more than 1000.

Otherwise  you will overdrive the sound device and make nasty noises.

 

Ken

KE2N

 

 

From: app_rpt-users-bounces at qrvc.com [mailto:app_rpt-users-bounces at qrvc.com]
On Behalf Of Corey Dean N3FE
Sent: Saturday, September 18, 2010 9:59 PM
To: Corey Dean N3FE; app_rpt-users at qrvc.com
Subject: [App_rpt-users] One last thing...

 

 

I am loving the app_rpt node.  I am having a blast with it and it is quite
powerful, but I have one last thing I just can't figure out.

The audio coming from allison and other connect messages, even playing the
time with the male voice crackles.  It doesn't matter if I lower the audio
in the configs or not.  I even wired up a powered speaker and have the same
result.  The audio sounds like it is 5KHZ off.  Changes the settings in
radio tune only lowers the levels, it doesn't remove the crackles, it just
lowers the volume of the crackles.  Any ideas on where I should be looking
to rememdy this?  Is there a setting somewhere where I can lower the built
in voice?

---------------------------------------------------------------------
Corey N3FE

-- This message has been checked and is believed to be clean. 


--
This message was scanned and is believed to be clean.
Click here to report this message as spam. 
http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=076CD2F4D0.AF1FA




--
This message was scanned and is believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20100918/934387c9/attachment.html>