[App_rpt-users] node stops talking to URI

[Jim Duuuude]

Ahhh... well.... ahhhh...

Since it doesnt seems to be a problem with Asterisk, it would unfortunately point
to a problem with the USB hardware on your PC, or some sort of weird driver
incompatibility with Linux. I know it has done this on 2 machines. Over the years
I have had MANY machines that have exhibited similar and even stranger problems
with their USB.

USB just isnt reliable. We know it. Thats why we dont and never have recommended
the use of USB devices on a mountain top or other hard to get to locations. 

USB, it isnt just for breakfast anymore......   :-)

JIM WB6NIL


> Date: Sun, 19 Sep 2010 10:33:43 -0400
> From: jrorke at cogeco.ca
> To: app_rpt-users at qrvc.com
> Subject: Re: [App_rpt-users] node stops talking to URI
> 
>   The URI appears to be off with no lights on when this happens.
> 
> On 9/19/2010 10:03 AM, Ken wrote:
> > This sounds like a case where the BIOS (or CENTOS?) decides to shut off the
> > USB port for power management reasons after seeing no data for an extended
> > period of time ... does the green light just stop blinking or go out
> > altogether?  Maybe you could program the links to send some silence or
> > something every 5 minutes and see if that keeps it alive... as an
> > experiment.
> >
> > Ken
> >
> >
> >
> >> -----Original Message-----
> >> From: app_rpt-users-bounces at qrvc.com [mailto:app_rpt-users-
> >> bounces at qrvc.com] On Behalf Of REDBUTTON_CTRL
> >> Sent: Sunday, September 19, 2010 8:50 AM
> >> To: app_rpt-users at qrvc.com
> >> Subject: [App_rpt-users] node stops talking to URI
> >>
> >>    Hi All, I have been having this problem for quire some time.
> >> I have a server box that has 2 nodes on it with URIs.
> >> The first node is 2379 (USB0) and the second is 2416 (USB1).
> >> The problem is the first node seems to stop talking to the URI
> >> randomly.
> >> The computer says its still connected to the URI but the URI wont key
> >> the radio nor any RX audio comes through when this happens.
> >> Asterisk reports the 2 nodes connected internally when its in this
> >> faild
> >> mode and I can get audio from the second node 2416 if I am connected to
> >> 2379 with an other node but no audio is transmitted out on 2379.
> >>
> >> The 2 nodes are simplex nodes. These 2 nodes create a link bridge to
> >> connect 2 repeaters together.
> >> I normally have a start up macro to connect the 2 nodes and its a perm
> >> link.
> >> When the first node stops talking to the URI the kink goes down between
> >> the 2 repeaters.
> >>
> >> We tried swapping the 2 URIs to see if the problem follows the URI but
> >> no it always happens on the first node 2379.
> >>
> >> The only way I know how to get it going again is to remotely reboot the
> >> box. Nothing else will get the node working again.
> >>
> >> The original box (p4 3 gig IBM) was set up the same way and the same
> >> thing was happening once every 2 to 3 weeks.
> >> Since then that original box died- ps failure so I rebuilt the box in
> >> July on an other machine (p4 3gig HP).
> >> Now we get the same failure but much more often.  Now it happens on the
> >> average once aver 2 days and some times within 8 hours of a re boot!
> >>
> >> When I rebuilt the node I used the latest Acid cd at the time and re
> >> did
> >> all the conf files with the latest configs so no copying from the
> >> original backup files. So this is 2 different computers with 2
> >> different
> >> builds with the same problem.
> >>
> >> Here's the node info :
> >>
> >> app Rpt  version 0.255
> >> These are migrated nodes.
> >> The URIs are original CM108 units.
> >>
> >> I did report this issue some time ago but nobody has any ideas as to
> >> whats going on. This time I knbow its got to be something in software
> >> on
> >> the first node.
> >> Sorry for the long post but this has been nagging me for some time and
> >> now its getting to the point that I have to reboot the box before nets
> >> to make sure its working and even then there is no guarantee it will
> >> stay connected.
> >>
> >> Thanks,
> >>
> >> Jon VA3RQ
> >>
> >>
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at qrvc.com
> >> http://qrvc.com/mailman/listinfo/app_rpt-users
> >
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20100919/ccd7b568/attachment.html>