[App_rpt-users] Low Band Remote Base

[David KE6UPI]

Check out this webpage.

http://ohnosec.org/drupal/node/175

You may also specify the offset in a memory channel
by adding an additional parameter before the options,
for example:

01 = 147.435,103.5,1035,h-t  ; This would be for W6NUT in Los Angeles
with input of 146.40

David

On Sun, Dec 4, 2011 at 2:37 PM, Monty <monty at ke7jvx.com> wrote:

> Hello Everyone,
> I have successfully integrated a Low Band Syntor X with an Xcat to app_rpt
> using CI-V.  I have a problem though.  There are currently 6 6m repeaters
> here in Arizona, 3 have 0.5 mhz split and the other 3 have 1 mhz splits.  I
> have only been successful in programing the 0.5 split frequencies in
> App_Rpt memories.  Is there a trick to make it split to 1 mhz or is that
> not possible?
>
> Monty
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111207/c834ec4a/attachment.html>