[App_rpt-users] CTCSS Drop Out Time

[Lu Vencl]

Yeap, I was the one that brought that up several months ago, but I never
could figure out how to "make / make install"  .

I have no clue what that means.. If someone could help me out with that, I
will finally get this to 1200 MS which will cover my Yasue radios.

Thanks!

KA4EPS

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Ken
Sent: Saturday, December 24, 2011 9:02 PM
To: 'Jim Duuuude'; w7ry at centurytel.net; 'app_rpt mailing list'
Subject: Re: [App_rpt-users] CTCSS Drop Out Time

 

Notone AKA chicken burst gives you carrier with no tone at the end.

But some radios are too slow in closing the CTCSS and still make noise.

There was a posting on here a while back that pointed the time delay in: 

 

/usr/src/asterisk/asterisk/channels/xpmr/xpmr.h

 

The default is 600 ms.  Some radios might be slower than this.

You could change (increase) it, then  make / make install and restart
asterisk.

 

My Alinco DR-?35 series seem to want to give you a small squelch tail no
matter what you do, however.

 

73

 

Ken

 

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim Duuuude
Sent: Saturday, December 24, 2011 6:17 PM
To: w7ry at centurytel.net; app_rpt mailing list
Subject: Re: [App_rpt-users] CTCSS Drop Out Time

 

try

txtoctype = notone

in usbradio.conf

JIM WB6NIL

  _____  

From: w7ry at centurytel.net
To: app_rpt-users at ohnosec.org
Date: Sat, 24 Dec 2011 13:55:51 -0800
Subject: [App_rpt-users] CTCSS Drop Out Time

Anyone know if there is an adjustment of the time the transmitter stays
keyed, and the PL tone drops out and where that setting is?

With my rigs, I still here the squelch crash after the repeater drops out. I
would like to cut the PL off a little sooner or delay the transmitter a
little longer.

 

BTW, I'm all up and running with the repeater function and the node!  Thanks
to all that helped me get past the learning curve!

 

Thanks!

Merry Christmas

73 Jim W7RY

 

 


_______________________________________________ App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111224/3e592032/attachment.html>