[App_rpt-users] URI Configuration/Testing

[Rod Schnell]

Hi all,

I've gotten my (N2OYJ) system up and functioning in a simple mode so I can
have access to the local repeater from the computer room.  A friend and I
are trying to set up another unit for something similar. Using XIPAR as the
base, a URI and either a CDM750 or GM300 as the radio it attached to.

There appears to be an issue I haven't yet found.  Using the working
configuration from my system as a starting point, the 'radio tune rxnoise'
returns the error as if there is no signal on the flat audio pin (PIN 11).
This occurs on BOTH radios.  The next step is to bring the working radio/URI
combination to the non-working system and see it the error remains, then
switch URI's;all to try and isolate the problem.

Q: Is there a way to test the URI? Either using a signal generator or not
using a generator (both was might be good for others).

Rod
N2OYJ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110207/db465aa0/attachment.html>